• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

case

  1. T

    Case 850 D TCV Advice needed

    Good morning all, We recently purchased (And Received) a Case 850 D from an auction it starts and (Moved) just fine off of the trailer and around our lot. We were told the brakes needed service and that fluids and filters should be changed. A few days later we went to move it into our shop for...
    • TallenStl
    • Thread
    • 850d brakes case help needed transmission wont move
    • Replies: 6
    • Forum: Dozers
  2. O

    Case CX31b boom swing

    Hello everyone, This is my first post so I apologize in advance if I’m asking the wrong crowd or if i’m in the wrong area. I recently purchased a Case CX31b and I can’t figure out how to operate the boom swing cylinder. The machine came with a hydraulic hammer which is powered by two auxiliary...
  3. B

    CASE 580B Gear Shifter Forks/Rail removal

    Hi, I have an issue where my 580B (shuttle) backhoe will not shift into 1st or 2nd gear. The 3rd/4th gears shift fine. I've taken off the upper plate of the transmission box which holds the gear shifter, rails and forks. The 1st/2nd rail would not move. With some tapping with a hammer, to the...
  4. C

    Case CX350 fuel filter issue

    Hello everyone, first time poster. I’m in Australia and I have a problem with a case cx350. It has an Isuzu engine and the first fuel filter (clear bowl style) is only filling up halfway? No matter how long I try to bleed it the filter won’t fill over halfway, I’ve never seen this before on one...
    • Cc2397
    • Thread
    • case excavator fuel filter fuel issues
    • Replies: 4
    • Forum: Excavators
  5. L

    Case 580 Swing broken

    Hey there, My Case 580 super M backhoe swing broke. I rebuilt both swing cylinders about a year about because they were leaking slowly. Bought rings from "Brokentractor.com" I think. Definitely not from the dealer trying to save money. Over the last year the swing developed a drift that got...
  6. J

    2017 case sv185 no glow plug light

    I recently purchased a 2017 case sv185 skid steer and it killed while using, now the glow plug light won't illuminate and no start, 1800 hours, I'm new to skid steers, not sure where to start
  7. GMedich

    New Member - Delton, Michigan

    Hello. I recently purchased a Case 580 CK to help me work on my cottage and 5 acre property near Battle Creek, Michigan. It runs well, but doesn't stop well... yet. Researching the model brought me to this site which should prove to be helpful. Thank you all for your participation.
  8. U

    Case 688 tracking

    New here. So my case 688 the right track is super slow to engage. Forward or back. It acts like it takes forever to get fluid to the drive. Once it is moving it tracks good and same speed as the other side either direction. Should I start at the pedal or is there a separate relief valve or...
  9. J

    case 1280 B Excavator

    Need used or new Left Front wheel idler for case 1280 B track hoe anyone have one they are parting out, or know where I might find one, any help appreciated.
  10. S

    Help! Case 70xt Auto-level/electrical issues.

    I just purchased an 04 Case 70xt for a very good price in seemingly really good condition! It does have a few of issues, one of which is very frustrating: it is stuck in self level mode. When raising the arms it auto levels. When lowering it holds the position you left it in until you're...
    • Stohne
    • Thread
    • 70xt case electrical hydraulic
    • Replies: 0
    • Forum: Skid Steers
  11. C

    9050B excavator

    bonjour à tous j’ai un boîtier 1995 9050b avez-vous des photos de l’emplacement du tuyau hydraulique sur la commande pilote et le banc de 8 électrovannes à la vanne de régulation J’ai les schémas Je ne comprends rien
  12. B

    Case 1835c blowing smoke when idle is raised runs rough please helppp

    So I have this case 1835C with a continental TMD20. 3 cylinder diesel I was using it for about two hours when all of the sudden I saw a lot of black smoke coming out of the tailpipe I checked the fuel I replaced the air filters and the fuel filters still doing the same thing I bought new...
  13. J

    I bought a Case 780...

    Hello all, first post. So I just purchased this today, it seems to be in fair condition. Except: It has some brake issues (no brakes at all). I was able to glean some info off of another post on here on the brake topic. I'm hoping to get some recommendations on parts suppliers to start...
  14. Sharkproof

    Case 1845c Skid Steer Ripoff?

    I recently bought an 1845c at auction based on video, pictures and it's reputation as being "bulletproof". The seller disclosed a hydraulic leak, but claimed unit was operating properly. (I did notice after the fact, that in the video demo the driver only made left turns). Well it turns out...
    • Sharkproof
    • Thread
    • 1835 1840 1845c bobcat case deere gehl skid loader skid steer
    • Replies: 28
    • Forum: Skid Steers
  15. O

    Case 1840 right side half speed in forward only.

    This is my first post so let me know if this is in the wrong place. I just picked up a case 1840 with around 1400 hours. Everything seems to work how it should other than the right side moves significantly slower than the left in forwards only. In reverse everything seems to work how it should...
    • OMH
    • Thread
    • 1840 case case 1840 hydraulics m91
    • Replies: 2
    • Forum: Skid Steers
  16. M

    Case 580k won't start without ether after sitting over 24 hours

    I just recently bought a 87 case 580k with the 4bt cummins non-turbo, and when it sits for more than 24 hours it has trouble starting. I believe it is getting air in the fuel system. I have changed the fuel level sensor(it didn't work before), so it has plenty of fuel and the fuel looks good, no...
  17. G

    New Owner of Case CX135SR Excavator

    I bought a used 2006 CX135SR. I am wanting to do a full service on it. I found service manuals but parts are another matter. All the part numbers for filters are listed on the excavator but finding places online that have the parts are difficult. At least for me. It isn't like looking up...
  18. E

    Case 1845c weak drive motor.

    I have a 95 1845c with originally weak drive motors on one side. The guy I bought it from had a machine that had bad drive motors and he swapped the motors fixing his and now the machine I have is weak. Sold it because it had been in a fire and needed alot hoses and stuff etc. So with that in...
    • Ewayne_R
    • Thread
    • 1845c case drive motor pump side spool tandem valve weak
    • Replies: 6
    • Forum: Skid Steers
  19. A

    Case 580SE Hydraulic Backhoe control issue.

    Hi everyone. New here. I have a mystery year late 80s early 90s 580se backhoe with hand swing controls. Every individual control works as it should very strong (boom, stick "dipper", curl) but as soon as I ask for a two controls at once they both slow to a snails pace or dont move at all...
  20. F

    Pto wood chipper on a case 580c

    Hey folks, I have a Case 580C with the 3 point and hydraulic pto, I need to know if hooking up a 3 pt wood chipper directly is ok or will it break a shear pin or pto with the hydraulic pto?? I don't have much space to put a slipper clutch in if needed, I'm checking if anyone runs a chipper...
Top