• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

case

  1. D

    Help Needed Power Shuttle Leak Case 580C

    Hello Friends, Any idea what this is that’s leaking hydraulic fluid on the side of the power shuttle trans for Case 580C backhoe? Think it would need a new gasket or part replaced? Thank you!
  2. D

    Help Needed Purchasing Case 580C

    Hello Friends, Does this Case 580C engine sound normal? (video link below) Can't tell if the engine "ticking" sound is normal since I haven't been around these Case 207 engines and feel like I'm hearing a bit of a tick. This is a backhoe I'm considering purchasing from out of town and don't...
  3. C

    1968 case 530ck transmission locked up

    Hi I’m new to this forum and looking for some advice. I just bought this case backhoe yesterday it is a 1968 case 530 ck with the 4 cylinder gas motor. I was moving it around my yard today and all of a sudden it acts like the transmission is locked up.. I don’t believe it to be the brakes as...
  4. L

    Case 1835C won't start with ether

    I have an older Case 1835C that doesn't like starting. On a regular basis for starting it I need to spray ether into the air intake and have a battery jumper on it to help it spin fast enough. This skid steer had been sitting for many years before my brother got it cleaned up and gotten it...
  5. M

    What is the make of your backhoe

    If you own more than one pick the one you use the most.
  6. K

    Antique Case Hydraulic Pump Upgrade

    Hello everyone, Looking for those who are more experience with this sort of thing than I am. My 1963 Case 530 Loader/Backhoe just pushed the seal out of the hydraulic pump: typically a strong indication of a worn out pump as I understand it. Can anybody verify that? Now of course this pump was...
  7. T

    2012 Case 580SN WT Starting Issues

    I'm trying to troubleshoot what is going on with a 2012 580SN WT, it is having a rough time starting. Recently changed the fuel filter and I've been advised to check the injector lines for a possible air lock. I am looking for the service manual if anyone happens to have one or have any advice...
  8. C

    Case sv216 roller no start issue

    Got a case sv216 roller with common rail cummins engines, crank no start issue, what should I check for?
  9. C

    Case cx350b excavator monitor issues

    Hey need some help with a case cx350b excavator, monitor powers up but shows no information, has active code for CAN communications fault, throttle doesn't work, no hydraulic functions work, does not shut off from the key. Checked all the normal stuff fuses, monitor connector, switched monitor...
    • Cat.man
    • Thread
    • can data case case 350b ecm electrical fault excavator fault code
    • Replies: 10
    • Forum: Excavators
  10. F

    CASE 60XT float operation

    I am having trouble trying to figure out how to use the bucket float for this 60xt. This is an extra machine around the shop and we want to use it for our sectional snow plow this winter. Any help would be greatly appreciated!
  11. A

    CASE 580G - request for advice.

    Hi everyone, I recently bought my first TLB or as the rest of the world calls it, backhoe. It is a Case 580G that was sitting for a while when purchased but I have been putting in work repacking cylinders and changing hydraulic hoses etc. trying to bring it back to its former glory, but it has...
  12. Jake Erickson

    821 CASE TRANSMISSION

    Hello, 821 (no letter) with zf transmission. Today I had first gear go out in the pay loader. I assumed it was just a solenoid as a few years ago when I bought it I had to put in a new one because first gear was out. Drove it to the shop and found out the trans oil cooler has a hole in it...
  13. C

    Need advice: Case 580K Backhoe Transmission (phase3) Any information or knowledge is appreciated!

    We have been reconditioning a Case 580K backhoe and could use some advice & input from anyone knowledgeable on the phase 3 model. This is the newer style 580k and it’s very difficult to find information or experience on this model. Seems like everything pertains to the original 580K. The...
  14. Roosterw9

    New to HEF

    Hello all , I’m a new member to hef , after a couple of years of acquiring answers here for various projects I figured I would join too seek and share some knowledge , Is anyone on here in British Columbia ? I just purchased a 1975 case 580B ck and am having the power shuttle issues , It was...
  15. U

    Drott excavator

    Im looking for parts for a drott 40. Anyone near-ish to North Dakota have a parts machine or parts? 701-840-8122
  16. A

    Case 480ck with model 26 backhoe hydraulics

    I recently picked up a 1968 case 480ck backhoe to do work on my 11 acres in the mountains... It reluctantly sputtered onto the trailer and then back into my woods with a rag stuffed into the carb choking the hell out of it, and every single fluid is full of water. This is my first heavy...
  17. C

    580CK Power Steering

    I recently resealed my steering cylinders because the glands leaked bad. After putting them back together and using it for many hours of loader work, no leaks. However, it has developed an issue of when you turn the wheel, sometimes it takes a rotation or two before you feel resistance and the...
  18. C

    580CK Steering Cylinders

    Hi all, I am putting new seals in my steering cylinders on my 580ck. The kit came with all pieces besides the actual piston seal. The part number for the piston ‘assembly,’ which is the piston and single O-ring, is A36395. Does anyone have a part number for just the o-ring? The parts manual only...
  19. E

    Case Backhoe 680G front bucket teeth

    Hello, I bought this machine Case Backhoe 680G a few years ago. I have only good things to say about it. I got this machine to do some work around my farm roads, building, garden, etc. The digger in my machine has a digging bucket so it has teeth but the front end bucket has no teeth. I have...
    • Edc
    • Thread
    • backhoe 680g case teeth front end bucket tooth for case front end bucket
    • Replies: 4
    • Forum: Tractor/Loader/Backhoes
  20. A

    Case 580CK Loader Lift Hyd Cyl Replacement

    You all are a huge help everytime I come around. One of my lift cylinders has a dent in it which has rubbed a flat spot on the piston. The gland and rod are fine. I am having trouble finding a replacement cylinder. What companies would you all suggest checking for a replacement? Are there new...
Top