• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

case

  1. P

    Case tr320 code (4752)

    My skidsteer is throwing the 4752 code (command plausibility check in manual) Which I believe is the left joystick. It wont move and the red STOP light is flashing and beeping. I have checked and cleaned most of the wiring harness. I have pulled both swashplate sensors off and cleaned them...
  2. C

    Case 1840 Skid Steer not starting

    Good afternoon to all, I have an Case 1840 Skid Steer ID# JAF0221866* that has been giving me issues starting then staying running. The first time it happened the engine revved high, low, high, low, died and would not restart. Before this happened it had been running without any issues or...
  3. DaveSh

    Help to identify my Skid Steer

    I recently bought an old Skid steer to use on my acreage. It works well enough and the price was right. But I'd like to know what it is. I have scoured the internet and I "think" it is a Massey Ferguson? But I have no idea. And it's not exactly like the pictures I found online. Can anyone...
    • DaveSh
    • Thread
    • bobcat case massey ferguson skid loader skid steer
    • Replies: 10
    • Forum: Skid Steers
  4. outlawspeeder

    Shuttle linkage Case 580C

    A while back I rebuilt my shuttle transmission and I think I have the linkage wrong somehow. Now somehow it wouldn't go into reverse. I played with it and if I rotated the solenoid the rest of the way it would lock over center in reverse. I shorten one rod and lengthen the other. Looking...
  5. C

    Case controls question

    We got a 1996 Case 9050B a few months ago, it’s been pretty good to us but The last time I got in it none of the controls would work. I put the arm rest down, put the lever down, and pressed the control unlock button and that usually makes everything work just fine but today the lock on the...
  6. outlawspeeder

    Tapping into the Hyd of a Case 580C

    I want to add a thumb to my backhoe. Welding the thumb on is pretty easy for me. The problem I have is getting into the hyds. I looking for where I should tap into the hyds. What type of valve will I need. Where can I get one without having to break the bank. (this has to pass the wife...
  7. outlawspeeder

    Case 580C 3rd and 4th gear

    I rebuilt the Shuttle Transmission and was expecting better out of 3rd and 4th gear. In 1st or 2nd it will climb a steep hill with a load but in 3rd or 4th it will it will barely get rolling... Is that normal for 3rd and 4th? I have to drive this about 7 miles (road mostly) and really don't...
  8. P

    Case 580b what is this reservoir canister?

    Hello everyone, new to the forum and would like to thank everyone in advance for the help i have already received just reading through these threads. I have recently scored a 74 580b and everything seems to work great. I would like to keep it that way so i have a complete fluid change on slate...
  9. J

    First dozer purchase,

    Looking between CAT, Case, John Deere. Between 25,000-35,000LB machine application: light dirt work (house pads, clearing work, etc) not sure if that is broad enough. But don’t want to limit the work. I have looked at the different brands just looking at quality and getting good service from...
    • Jacob Johnson
    • Thread
    • case cat entrepreneurship firstimebuyer johndeere
    • Replies: 9
    • Forum: Dozers
  10. C

    Case 9050 crank no start

    We just bought a 1996 case 9050b with an m11 Cummins, it was running great and out of nowhere it idled down and just died. We found out one of the batteries was junk so we replaced it and now it will crank but no fire. There’s no smoke when it’s cranking so we changed fuel filter and it fired up...
  11. J

    Case tr270 unswitch battery fuse keeps tripping

    Hey boys, our 2017 tr270 keeps tripping the unswitched battery fuse, Any ideas?
  12. A

    Case 480F LL PTO weak when running for 30+ mins

    We have a Case 480F LL (has a 3 point and a hydraulic driven PTO instead of a backhoe), we have a small farm and use it for moving dirt, stacking hay bales and running the round baler. After running the round baler (a Ford 552 that we have run with a 38HP Kubota, the Kubota was marginal on HP...
  13. M

    Who tunes Case skidders?

    I'm looking to upgrade a case 310 with a larger fuel pump and a tune to get more power. As I understand you can put the 340s fuel pump on it and achieve the same power level. Has anyone done this or know of shops that do it or where to go?
  14. A

    Squealing sound on new Case TR310B

    Hello all! I recently (in April) bought a new Case TR310B w/ high flow and a 72" High Flow Blue Diamond Brush Cutter. My question is when running the cutter in high flow and attempting to move the tracks forwards, back, or side to side the machine makes a "squealing" sound (like a belt...
  15. G

    Case 821B stuck in reverse while forward

    I have a 94 case 821B that runs and goes into gear, it will reverse but when you put into forward gear it appears it’s locked in forward and reverse at the same time.
  16. Swampman711

    Case 680k won’t go forward

    Hey guys I’m new to this forum I’ve been looking trying to find a thread about this and can’t seem to find one if you could point me in the right direction or maybe this will be the start of a new one for people to learn from thanks in advance! I’ll do my best to describe what I have going on...
  17. M

    Case TR270

    Hello everyone, I am looking for anyone that has any links on info for removing high pressure pump from TR270. Also any information for fuel system pressures. I have narrowed down to pump not building enough pressure but don't have any specs on it just going by what I'm seeing. Relief valve is...
  18. L

    Help with Case Track Loader

    Hello all, I have been struggling for a week trying to get my skid steer back into operation. Backstory is I got stuck out of state for two months and the skid got infested with mice. I have a 9406 code on the tr340. I have taken apart the whole cab to expose wires and I replaced two under the...
  19. R

    Case 888 EX slow crank no start

    i believe machine is 1985 case 888 5.9 cummins serial number CGG0015457 customer put new starter, cables, lift pump unit seems to crank slow, suspect hyd pump causing drag. i am unfamiliar with unit and looking for info, is there a load sensing line on pump that a stuck valve could be...
  20. J

    Case 688 Hydraulic Issue

    Hi, I read through the threads and saw nothing like the problem that I'm having. I have a 89 Case 688 excavator that I bought used with hydraulic issues. The previous owner was tracking across a field when the unit just shut off. It lost electric power. He found a bad circuit and ran a hot wire...
Top