• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

oil

  1. B

    Volvo A30D 2005 warning symbol

    nem tudjuk kitalálni, mit jelenthet ez a szimbólum, vagy mi okozhatja
  2. C

    Cat TH406C hyd. Oil overheating

    I’m currently working on a solar farm and I’m running a Cat TH406c telehandler. Since I’ve been in it it’s been nothing but issues. Randomly it’ll start an ear piercing alarm and the hydraulic temp light will come on. I’ve had the mechanic look at it and it shot a code saying the torque...
  3. K

    Kobelco 909LCii coolant in motor oil known causes?

    Hello group. I'm considering buying a Kobelco 909LCii with the mitsubishi turbo 6DC15. Are there any known issues to consider when diagnosing coolant in motor oil for this particular engine? It happened shortly after a coolant flush. Which raises my suspicions. The coolant pressurized the...
  4. F

    Looking for a used engine for my 1998 Hitachi Ex350H-5.

    Does anyone know where I can find a used engine for my excavator or maybe you know someone that has one? It has an Isuzu B-6SD1T engine. I'm located in northern Alberta. I keep getting coolant in the oil and I can't find where its coming from. Starting to suspect a cracked block so I am...
  5. P

    Case 580b what is this reservoir canister?

    Hello everyone, new to the forum and would like to thank everyone in advance for the help i have already received just reading through these threads. I have recently scored a 74 580b and everything seems to work great. I would like to keep it that way so i have a complete fluid change on slate...
  6. H621

    Swing motor oil

    Hey there, I'm working on a yanmar vio 20 and got a new swing motor. My question is do I need to fill it with oil, or is it lubricated by the oil flowing through it? There is no dipstick and only a couple small plugs on the side.
  7. C

    New Holland 190b, looses power at the tracks after 1 hr.

    I have new Holland 190b. 3k hours. has several issues. 1: it never has had enough power to push up to something and spin the tracks. After about 1 hour of use, it has almost no power. it will not push into a pile of gravel and fill the bucket. running in high gear without anything in the bucket...
  8. C

    2014 bobcat t590 10w30

    I have a NH 218 skid steer that the dealer recommends running 10w30 for the hydraulic system. Is it ok to do the same in the bobcat t590? When I asked the salesman yesterday he claimed bobcat hydraulic oil just says that on the bottle so he didn’t know and obviously recommended buying the bobcat oil
  9. Ammar_Jo

    Volvo L120D Oil pressure Low!!!!

    I changed the oil pressure sensor. the loader works fine. But it shows that the oil pressure is low And it shows up and disappears when I prees the pedal.
  10. C

    MF50A oil leak

    Morning all, I recently got MF50A, everything works as it should on the TLB which is rather impressive for its age. Mainly small stuff on the 5 acres I just bought so I think I will get moneys worth in no time. But it does have one strange issue, it leaks engine oil out of a small hole on what...
  11. B

    Hitachi EX150LC Issues

    Hi all, I just acquired an EX150LC Hitachi, and I'm losing substantial amounts of hydraulic oil through the swing motor (bleeding through to the turn table ring gear). I will be pulling the swing motor tomorrow, figuring it is a seal of some sort. There is no differential oil showing on the...
  12. R

    Hi All, Rob (Pure Lubrication) Melbourne, Australia (Newbie)

    I am the owner operator of a mobile oil system cleaning business (Pure Lubrication www.oilsystemclean.com.au). I currently clean all types of oil systems including Hydraulic, Gear, diesel, synthetic. I do a lot of excavators, concrete pump trucks, reach stackers, forklifts among other oil...
  13. E

    Temperature sender

    Anybody know how I can fix the oil temperature sender on my Case 580SE? I have tested the electrical circuit and gauges as per service manual and they work just fine. I did a online search for the part number D 6544 but that didn't turn up anything. Or if somebody knew where I could buy it...
Top