alrman
Senior Member
- Joined
- Jun 20, 2009
- Messages
- 3,308
- Location
- QLD Australia
- Occupation
- Diesel Fitter;Small Business Owner;Cleaner
The plot thickens......
By the looks of the flow control spool, the valve you have is the A38031 not the assumed A37546 (correct by serial number)....... so the gaskets to be used should be A38030 & A38029.
That is of course that the oil distrubution plate is also not correct as per serial number.
This would have been easier to confirm if you had the original gaskets.
BTW - I would usually fit those valve gaskets with no sealant on them at all, it makes them more reuser friendly. That blue stuff looks like RTV silicone, it is good stuff when used in the proper application, which is not control valves.
By the looks of the flow control spool, the valve you have is the A38031 not the assumed A37546 (correct by serial number)....... so the gaskets to be used should be A38030 & A38029.
That is of course that the oil distrubution plate is also not correct as per serial number.
This would have been easier to confirm if you had the original gaskets.
BTW - I would usually fit those valve gaskets with no sealant on them at all, it makes them more reuser friendly. That blue stuff looks like RTV silicone, it is good stuff when used in the proper application, which is not control valves.