How Did You Find Us?

[dixon700]

Looking into getting a 580k or a 580sk and in the research of them this forum popped up many times.

 

[bruschino1978]

Hi guys,

Its a pleasure to be part of this forum. I had the luck to find this site, during a search on Google. I am a mechanical engineer, specialized in CAT generator sets, specially 3306, 3412. I also manage a lot of heavy duty softwares, so if anyone here need information, spec, schematics, etc please let me know and I will try to help.

Regards,
bruschino1978

 

[Hank R]

I was told about this site 3 or 4 years ago by diamondTguy and checked in 3 or 4 times a year and finally decided to join in here. I am a Pacific truck guy drove for close to 9 years Pacific and Hayes off highway hauling coal near Sparwood B.C. Have many pictures .

Hank R

 

[ACCI]

I found you guys by searching Google for help with a problem my Case 90XT is giving me.
i will post my problem...

 

[Isparkle]

Hi

Hi, I googled "local 12 how to join" You were on the first page about 3 or 4 entries down.:usa

 

[1466IH]

I was doing a search on backhoe attachments for deere and cat track loaders

 

[OldMontanaPhart]

I found this forum by searching for info on "Case 530 CK diesel TLB". I just bought one of these beasts and know next to nothing about it, am hoping to lurk here and learn how to fix it myself WHEN things continue to go wrong...current issues at purchase are:

Leaky fuel tank-leaking around rear stud
Pretty much covered in greasy dirt on rear half due to #1
No working gauges-instrument cluster rusted
Hand throttle presently operated with a piece of baling wire
Blown gasket between exhaust manifold and muffler
Not charging [no wiring connected to generator...]
Rear tires are different sizes, unbelievable they hold air
Swing cylinders drip, pretty weak
Stabilizers don't extend quite far enough to lift rear off the ground

Good points are:

Starts w/o ether in this weather
Had shuttle clutch replaced ~ 25 hrs ago
all hydraulics work
Goes forward and backward
Steers easily both directions

 

[MEK]

I was recovering from a pinched nerve in my lower back, nothing to do but surf web. Looked up my JD 400 TLB and this site was listed. Read every thread, it is extremely informative and the followers are great.

 

[CDNDIESELMONKEY]

King of Obsolete has this forum listed on his website! Ive been an addict ever since.

 

[ericscher]

I was doing a search on a skid steer I'm looking at.

 

[dieseldog5.9]

I was looking for some obsolete service info on a lull 644, and found it here from another member. Hopefully I have been able to pay it forward to someone else who is in a jam.

 

[TerryH]

I found this site by Googling "forklift forums"

 

[PaulfromFL]

I googled my problem and several posts came up in the search. A lot of good info here!

 

[Frameroux]

I was searching for Randy Krieg on the internet and it lead me to this site...

 

[LLLearner]

I was researching more information on issues raised in class than my HD Mech foundation course was providing and found this site back in 2012!! It has helped me ever since.

 

[laycobeau]

Came up on a google search when I was at Combotronic (now closed) login combobeau reregistered when I came to
Layco Electric Innovations. Still repairing Heavy Equipment electronics. First encounter you helped me with a burned
resistor. got a customer running thanks much. Beau

 

[RDHunter]

Google Search for parts and help with D21a-6, information here was better than any I found anywhere else. NEW member and fairly new owner of dozer, used for light to moderate land clearing, personal use

 

[Boma SA]

I was searching for information about mini-excavators / skid steers on the network .....

 

[HWilliam]

Googling for info about our JCB 212S, and found the forums. Very informative.

 

[ssimpala]

Google. I farm and ranch with old worn out equipment and always have something broken down. This site comes up often when I search for parts or repair advice...so I decided to join.