• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. O

    Cat 943

    I have a cat 943 and it just seems to bogg when turning. It blows a little black smoke the whole time it's running and is worse when turning. I'm not sure if it's a throttle linkage issue or what. Fuel filter is new. Any input is appreciated.
  2. O

    Bobcat t770 with non bobcat grader blade

    I've recently purchased an auction special grader blade attachment and I'm wanting to get it working on my 2020 bobcat t770. The blade has several solenoids on top and 7 wires coming out, I've ordered a bobcat 7 pin connector to attach to it but doing my research online I'm not sure if that's...
  3. O

    Smitho 35 ton lowboy

    Recently purchased a smithco 35 ton detachable neck lowboy. It needs alot of work, as of right now it has the 10.00x15 tires with the old snap ring Dayton wheels. Is there a way to convert these old wheels to regular budd style wheels? Or maybe just a way to convert them to a tubeless style...
  4. O

    Cat 943

    I have a new to me cat 943 loader, I was pushing up some stumps and stuff today and noticed that my right side drive motor is making contact with the cover in from of it. Seems like it only does it while turning left. Looking it over I don't see anything loose or anything and the motor looks...
  5. O

    L10 Cummins oil filter stuck

    I purchased an old 85 international with the l10 Cummins and decided to go ahead and service it since one of the oil filters had a pin hole in it. Apparently someone has put them in with an impact or was just stronger than they thought. I managed to get one off but it took alot of force. Now the...
  6. O

    Cat 951B

    My cat 951b just developed a severe engine knock accompanied my excessive smoke from the ccv tube. Im pretty sure it has the D330 engine it right now. I was searching for a reman engine but i cant find alot on the 330 however i know they put a 3304 in the newer model 951c. Would i have to change...
  7. O

    New holland LS180 EIC

    I have a 2000 model ls180, the eic board is showing on voltage and i cant get it back to hours. The buttons dont seem to be working. Ive tried unhooking the battery over night it didnt help. Is there a way to get it back on hours without the use of the buttons? Also if the board is shot is there...
  8. O

    Takeuchi tb025

    Just purchased my first excavator. 1999 tak tb025. Got a good deal on it with certain issues so i couldnt pass it up. The pilot control valves are leaking and i was going to replace the entire assembly on both sides but i cannot seem to find the parts. Does anyone else have problem finding parts...
  9. O

    John deere hlr transmission adjustment

    I recently purchased a 1970 john deere 450 loader. The steering clutches were shot and have been replaced, i finally put it to work but after about an hour i started loosing reverse. High range was also an issue as well. I have noticed once i loose high range if i press the clutch about a half...
  10. O

    John deere 450 steering clutches.

    I recently purchased a 1970 john deere 450 loader. The left side wouldnt steer at all, the right side would until it got hot. Its in the shop now getting new clutches put in it but there is oil in the housings. Does anyone know where this oil may be coming from?
  11. O

    new holland ls 180

    Have a 1999/2000 ls180, 840 hours. Seems to run good but has a few issues I want to get some opinions on. First the hydraulic oil. Now matter how I check it or when I check it it doesn't show any on the dip stick. Even after adding a lot to it I get nothing. The second thing is sometimes when I...
  12. O

    hydraulic fluid for new holland

    Does anybody know what hydraulic fluid is needed for a new holland ls180. My first NH, my old case 1845c used 10w-30 motor oil. I checked it and its not showing much on the stick. I checked it while it was cold and machine had not been ran, not sure if I should check it after running it or with...
  13. O

    new holland ls180 cover plates.

    Got a new holland ls180, I'm missing the 2 cover plates on the bottom of the machine towards the front, right under where the foot pedals are. I'm probably just gonna fab some up but don't have nothing to go by, I want to get it as close to factory as possible. Anybody got a picture of these...
  14. O

    new holland ls180 creeping left.

    I recently picked up a ls180 with 831 hours. Its a very clean machine. At idle it wants to turn left slowly its not that bad but I'm new to NH and would like to know how to adjust this. Or get an approximate price from people that have had it adjusted at a shop. Thanks
  15. O

    new holland ls180

    Anybody got any ideas on what a new holland ls 180 would be worth? It has 831 hours on it and is over all a clean machine. Thinking about buying it but need some info on what the price should be around. I think it is a 2000 model.
  16. O

    new holland lx865

    I'm going later today to look at a new holland lx865 the machine has 2240 hours on it. The guy says everything is good. But he said it seems like one side is making a louder wining sound than the other while moving. I've never ran a new holland. Anybody got any pointers on what to look for so I...
  17. O

    case 1845c

    Got my 1845c back from the shop about a month ago. Had to replace the sprocket, cluster shaft and bearings on the right side. Ive used it lightly putting out hay and smoothing the driveway. Today I had to use it to dig up a water line just right under the surface of the ground. I parked it on an...
  18. O

    case 1845c side panels.

    Anyone know where I can find the side panels for a case 1845c. Its the ones that go on the outside of the cab, it covers the battery on the left. I need both left and right panels.
  19. O

    new bobcat t550 price.

    Does anyone know what the price would be on a base model 2014 bobcat t550? Ive put in a quote for base model with standard controls, aux hydrauilics and tooth bucket a few weeks ago at the local bobcat dealership. I still haven't heard anything ive even tried calling but got nowhere.
  20. O

    case 1845c chain case noise.

    I recently bought a 99 case 1845c with 2000 hours. Everything was was good with the exception of a few hoses. I put about 200 hours on it since I got it and was digging a hole with a stump bucket I pushed the bucket down and lifted front tires to dig. As I dig the tires lost traction and I...
Top