I have a reg which is used from my 100 pound tank but do not have any way of adjusting. Could remove the adapter going to it and then remove the fitting off current reg, but don't really want to do that
Starting to think Bls had the right idea. Have 125 in a MFN 10 tip, 40 for a hose, a propane reg for 100, welding for 250, now add propane and all the work to get the edge straight and were well over 500 and still might need some other stuff.
It looks to me like the edge is bent and twisted about 1+ inches. I think a new edge is the way to go ,what you pay for the edge you will save in per/hr cost trying to straighten it
.
Starting to think Bls had the right idea. Have 125 in a MFN 10 tip, 40 for a hose, a propane reg for 100, welding for 250, now add propane and all the work to get the edge straight and were well over 500 and still might need some other stuff.