rangerfreak
Well-Known Member
any dozer related questions
any questions related to the dozer
any questions related to the dozer
The threads must be rusted out...use a grinder or cut-off wheel on a grinder to remove the bolt head(s) and then you can remove the cover. Try using Kroil, PB Blaster or the penetrating oil of your choice to free-up the threads, then drill for an easyout and remove.striped the bolts onthe the plate that cover the grease fitting that tightens the tracks. any ideas on how to get these bolts out.
Actually, the day job is at a Japanese company. I had a friend explain it to me.That plate is interesting. Good to know that you can decipher their writing....
This cover is the one on the back of the dozer, sitting at an angle under the batteries.R Leo, how hard is it to get at that plate?....one for each side?
Post that link!!!!I know of a site with pics on a complete track roller job if anyone needs to check it out...on the Chinese tractor site.
Pete
what is the best tool to get striped bolts out besides drilling:Banghead