• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

starter

  1. M

    580ck starter

    Hi all, this is my first post. I've had a 1970(?) 580ck for a few years now, but I am working on my 2nd starter replacement. The first replacement about 5 years ago led to me replacing it right away because it was fluid was pouring out of the cone. I quickly swapped it out with a similar model...
  2. F

    955L Will Not Turn Over / Replacing Flywheel

    I'm getting rrr sound, "just whines no cranking or clicking" when turning the start switch. It seemed the starter wasn’t engaging the flywheel. Then did a bunch quick turning of the switch, back and forth, got it working. Ran the machine a few hrs. Turned it off, tried starting it again...
  3. Andrew G.

    D6C 76A Starter

    Have a customer that has a D6C 76a Dozer, Engine number (7M4400) and housing number (5m7844). He bought the dozer with no starter in it as the previous owners were still working on it. Need help finding the correct PN for starter as he has had no luck with multiple starters, serial number for...
  4. N

    Ford 555E Hard to Start - Fix Video

    I have owned a 1998 Ford New Holland 555E for 3.5 years and it has always been a pain in the ass to start. Even with a new & freshly charged battery it would almost never start just turn over very slowly. It would need extra boost from jumper cables or a starter box to actually turn over fast...
  5. J

    JD 310G Starter wont stay engaged.

    Hey all, Looking for some help on our John Deere 310g Backhoe. Backhoe started and ran for a few days, when we shut it down for the day and went to start the next morning, the starter would fire but not stay engaged. We figured the batteries were dead, we charged them up still no good. we...
  6. D

    New(2me)2008Jcb 214eS4 Cylinder bleeding off

    I got a 214eS4 2k hrs, rebuilt engine(4hr) and making this post to get advice on anything I should check/monitor. As of right now known issues. 1.When putting it in "hoeing stance" front lifted, stabilizers down. The front end bleeds off pretty fast 5-10 seconds. 2.when pointing the ho straight...
  7. Rob Mountain

    H80-B

    I recently purchased an H80 and was wanting to know if anyone knows if the starter is a wet starter. When I fill the transmission up fluid comes out of the starter solenoid as the starter is a unsealed version like on a truck. I don't have the engine manual so I cant reference the starter part...
  8. B

    New Guy :) 2007 Cat 315CL No Crank - need some guidance please

    Hello, New guy here, trying to figure out an issue with our 2007 Cat 315CL excavator. We have been unable to start it for a while now and need some help as I have reached the extent of my knowledge on these machines, I have a background in automotive work but new to heavy equipment. Basically...
  9. E

    Michigan L90 Electrical/Starting Issue

    Hi all, Anyone out there got some experience with this loader? Went out to start er up yesterday and got a bit of grinding (different sound that usual). Usually it starts right up. And now no start or even ACC power with key turned. At first i suspected dead battery due to something left on...
  10. T

    Kobelco SK160LC -Can only start by jumping the starter and won't charge

    Kobelco SK160LC Seeking input and guidance: Started the machine in the morning. Fired right up...no hesitation. Ran it for an hour and shut it down. Came back to it after an hour and tried to start it..turned the ignition on...had power....turned the key to start...nothing...No sound of the...
  11. J

    Can I lift the bucket on my 977l with the hook on the orops

    1976 977l with general purpose bucket and my starter is spinning but not engaging or disengaging. I have limited resources and I am wondering if I can raise the bucket by using a chain hoist anchored to the loop on top of the canopy. The starter is barely touching the flywheel , it has...
  12. D

    Another LB75 starter issue

    It's possible that someone else may have posted this problem. If so, please forgive me and direct me there and I'll read. If not, here goes: 2003 NH LB75B, 5200 hours. Problem: Starter turns engine over only a 1/4 of a turn and then goes click click, as if the batteries are dead...
  13. S

    Komatsu PC75uu-2 Starter Problem

    1. My 1994 PC75UU-2, Serial number 8310, Engine Model # 4D95L-1, was getting harder to start. I replaced the batteries but still turned over slow. Had a friend try and start while I watched and fire/smoke came out of the rear of the starter motor. Now it won't turn over at all. I suspect the...
  14. 8

    New Holland LB75B Starter Issues

    Hi everyone, I just joined hoping i could get some help on my backhoe! Thank you in advance for your time and help. I'll try to make this as concise as possible as it has been quite the journey. I have a New Holland LB75B backhoe that's around 15 years old. I'm not sure of the exact age. My...
  15. D

    STARTER 1967 INTERNATIONAL REMOVAL

    i HAVE A 1967 INTERNATIONAL TRACTOR WITH A LOADER AND BACKHOE. THE STARTER IS DEAD. IT SPINS BUT WILL NOT ENGAGE. I CAN SEE THE BACK OF THE STARTER AND SOLINOID. HOW DO I REMOVE IT? I WOULD REALLY LIKE TO FIX IT. I JUST DON'T SEE HOW TO GET IT OUT.
  16. N

    2010 Cat 252B Intermittent Wiring Issue

    I have a 2010 Caterpillar 252BII with about 350 hours on it. It's been having some intermittent wiring problems. I would say about 5% of the time, the machine will not start. No power making it to the solenoid. When this is happening, there is power leaving the ignition switch, but it doesn't...
Top