• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

jcb

  1. A

    Jcb 8085 excavator

    Hello can anyone help me with getting a service manual for a JCB 8085 min excavator please.
  2. H

    JCB 214S Powershift Transmission issues

    Machine serial #SLP214FCVE0460737 year? Here is the story, I purchase this 214S yesterday,-everything except transmission works no forward reverse nothing. crazy good deal but no support, no information just doesn't move thats it. (Ps I own and have owned a 1994 214S for about 8 years I had to...
  3. C

    JCB JS 220 2006 Weak Travel Speed

    Hi from Ireland Travel has become weak and slow on this machine on all 3 travel modes. I notice that speed increases a little when boom is raised while tracking. Reverse also seems a bit faster but this could be due to slack on the chains allowing the motors to start easier and get momentum...
  4. matthew murman

    Jcb 212s troubleshooting no forward or reverse

    my 1997 jcb 212s won’t go into forward or reverse. It didn’t break anything, I was clearing some horse poop and when I shifted it from reverse to forward it just won’t go. Ive tested the switch on the gear shift and the selector on the steering column and they are both good. Where do I go from...
  5. Montana_Jeremy

    JCB 1400B

    1988 JCB 1400B w/ the perkins and shuttle shift trans. Serial 339303. I have the service manual. What I can't find are specs for fluids -- it seems that everything is special this or that. Do you know if there are any suitable equivalents out there? 3 hours of research this AM is telling me...
  6. R

    JCB 212s

    I’m having a problem with my JCB 212s machine locking up and not moving, sometimes it will move right away and other times it takes a couple of minutes to start going. Warning light for transmission pressure is on. I heard that it’s possibility an issue with the pressure sensor that won’t allow...
  7. J

    Excavator humming/buzzing noise

    I just purchased a 2008 JCB 8060 Excavator. Everything seemed normal when testing it out. After having it shipped 600 miles to my house I have started to notice a noise. After it is running for a short time I get a humming/buzzing noise that seems to come from under the floorboard. The tone...
    • Jessie H
    • Thread
    • buzzing excavator humming hydraulic jcb noise pump relief relief valve
    • Replies: 0
    • Forum: Excavators
  8. Dok

    JCB 3cx (old) won't move forward or backward

    Good day! I have troubles with my JCB 3cx loader. I was working with it (loading some dirt onto a truck) and everything was working normally. Suddenly I couldn't go forward or backward. The engine starts just fine but I cannot move. I have read a lot on the internet where a lot of people...
  9. T

    JCB 3CX 1989 breaker lines Help

    Hello everyone, I have a JCB 3CX 1989 non-turbo backhoe, version without telescopic rear arm. I want to put a hammer breaker onto my machine. My JCB doesn't have any factory breaker lines installed, and it never had. I have bought used original hydraulic breaker line kit, and I want your...
  10. G

    1988 JCB 1550B Backhoe Transmission

    Anyone out there know where I can find a working or even rebuilt transmission for a 1988 JCB 1550B
  11. I

    JCB 260T electrical issues

    Hey Guys, I am in need of some help. For the last couple of days I have been troubleshooting a JCB 260T. The problem is definitely electrical. The issue begins with the HVAC system is not working, along with wiper motor. Starting in the fuse/relay box, I have checked and verified function of all...
    • iScott12
    • Thread
    • blower motor electical electrical problems jcb jcb 260 jcb 260t peice of junk wiper motor
    • Replies: 1
    • Forum: Skid Steers
  12. J

    JCB 214 hoe trouble

    Hi I have purchased a used JCB 214 and used it for first few months with no real trouble. Lately I have been having trouble with the hoe. It has the switch and button by the dash. To activate the hoe you toggle switch down and push button. Hoe engages. Well lately the hoe will just stop...
  13. M

    Fermeco 960 no control

    I have problem with my backhoe loader Fermeco 960,98 year, buzzer ring and alarm is on, I don't have control with joystick, there is electric joystick on machine, problem started after I washed machine, please help ? Regards, Milos
  14. N

    Advice on a JCB 214S

    Hi Folks, I'm Bill and am brand new to the forum. Have found it a great source of information by searching, and now I have some specific questions. After coveting a BH for years, I’m finally ready to pull the trigger, because I’ve justified it, at least in my head. I need to dig some pretty...
  15. J

    JCB 505-22 Wiring Harness Fire

    I'm in the process of repairing the wiring harness on a 505. It appears that everything not related to steering had been bypassed. It looks like the only electrical flow through the harness was to the 4 solenoids and the 2 proximity sensors. Also had 2 lines to the fuel tank. I'm not certain...
  16. T

    JCB 212S Transmission Pressure Sensor Light

    Just got this 1990 212S machine with 1500 hours on it and the Transmission Pressure Sensor Light is constantly on. Fluid looks red like ATF and is full. Have not ran it since the light is on, but it goes in and out of gear just fine with no slippage or hesitation. If I raise to front of the...
  17. T

    JCB Maximum Net Horsepower

    Does anyone know where I could find the maximum net horsepower (certified to SAE Method J1349 or ISO Method 9249) for a 2013 JCB 3CX?
  18. B

    Oil water mix in radiator JCB 185 Robot skid steer

    hey guys, any help would be appreciated. Picked up a jcb 185 robot skid steer. Runs great, but when I looked at radiator there is oil mixed with the water in there. I emptied the radiator and flushed it and after a few minutes it’s mixed again. Any idea how it’s getting in there and how to fix...
  19. R

    JCB JS220 LC

    We were in the market to buy a new excavator and had called a JCB JS 220 LC for demo . The machine was new and in good condition , with no sign of wear and tear . We tested the machine for almost 11 hours , mainly it was used in the removal of over burden from our basalt mine . The machine...
  20. B

    JCB 3xc torque settings for engine

    hello im rebuilding engine on jcb 3cx backhoe, it has JCB brand engine and i can't find torque settings for it anywhere. would anyone happen to have this? serial# for machine is 2006202, engine serial is sd320/40347u0501811.
Top