• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

deere

  1. M

    Deere 644J Hi-Lift Quick Coupler

    I currently have a 644J Hi-Lift with a Craig bucket, but would like to add a quick coupler so that I can put on a bale fork or snow blade at the farm (don't own either one currently). I am just curious what kind of modifications I am going to have to do to the bucket to make it work, and what...
  2. M

    Help for harnesses 200C LC

    Hello, hope you’re fine! Time ago somebody stole all harness from a machine i have, now i collected some money but im trying to look up for part numbers and i got some, but still not sure if thats all I have a 200C LC JOHN DEERE EXCAVATOR All wire was stolen, i mean all harness, in official site...
    • Miguel Mejia
    • Thread
    • 200 clc deere excavator john deere wiring harness
    • Replies: 1
    • Forum: Excavators
  3. K

    Deere 326e and 333g quick attach pins sticking

    Anyone have issues with Deere quick attach pins not fully releasing from attachments? I'm constantly getting things stuck because the lock pins don't fully open up, they stay sticking into attachments by about 1/2 inch. Both my machines have this issue.
  4. J

    John Deere 490 travel issues

    Hey all I’m new to the forum but have been lurking for years. I’ve run into a problem I can’t figure out. So I just bought a 1990 490D and all the electronics have been bypassed I didn’t do it I bought it like that. Engine runs great all dig functions work great so when I’m traveling it all...
    • jchand4
    • Thread
    • 490d deere final drives relief valve
    • Replies: 8
    • Forum: Excavators
  5. A

    700H Overheating

    I'm trying to help a buddy with his 700H that is now overheating. Ironically he bought it used and until 3 weeks ago he couldn't get any heat. For real no heat, in the cab that is, (I forgot to say he's running this machine in Alaska pulling a drag building winter trails) anyhow... I replaced...
    • AKLarry
    • Thread
    • 700h deere overheating
    • Replies: 10
    • Forum: Dozers
  6. BrentM

    Deere 328D joystick centering error

    Started my 2012 Deere skid steer a couple of days ago and it has a right joystick centering error. Can't enable the hydros so the thing won't even move. I've tried cleaning the connectors, etc., moving the stick slightly in all directions but no luck so far. I'm 90 miles away from a John Deere...
  7. funwithfuel

    Deere and right to repair

    Just stumbled on this on arf.com of all places. https://www.bbc.com/news/business-64206913
  8. Garrett Ahlf

    2011 John Deere 310J All Hyrdaulics Lost

    2011 John Deere 310J S/N 1T0310JXAB0201801 New to the Board I own a small equipment rental company in CA and searched for the solution to my problem and it led me to these forums. I have seen similar issues but mine seems to be a little more unique (I believe). Customer of mine was using the...
  9. Nathan Craig

    John Deere 350D Haul Truck. Only one wheel pulls the truck.

    I run a 350D truck in a rock quarry, and here recently we discovered only one wheel pulls the whole time. What would cause this? It got hung up the other day and even locked in only 1 wheel spun.
  10. E

    Deere 240 2000 model blows accessories fuse with key OFF

    I have a Deere 240 skid steer around 2000 model that blows a 25 amp F1 Accessories fuse as soon as it is inserted. The machine runs fine but does not charge, no lights, etc. because of the fuse. I have tested the relay for resistance, and swapped it for another one. No change. Relay seems good...
  11. Sharkproof

    Case 1845c Skid Steer Ripoff?

    I recently bought an 1845c at auction based on video, pictures and it's reputation as being "bulletproof". The seller disclosed a hydraulic leak, but claimed unit was operating properly. (I did notice after the fact, that in the video demo the driver only made left turns). Well it turns out...
    • Sharkproof
    • Thread
    • 1835 1840 1845c bobcat case deere gehl skid loader skid steer
    • Replies: 28
    • Forum: Skid Steers
  12. J

    Deere 450C transmission clutch linkage question...

    I have a Deere 450C crawler loader and it has not run in years, so a new battery and it is running fine. Went to move it and the clutch pedal linkage doesn't seem to be doing anything... I have the YUGE JD shop manual and I searched for transmission clutch adjustment and there is a tiny crappy...
  13. C

    Deere 444k dipstick tube broken

    444k loader, went to go check oil this morning before using it, the tube that is pressed into the block seemed to have snapped off nearly right flush with the block. Any recommendations or good ideas on how to get it out? Have new tube ready to go in just need good advice on getting the old one...
  14. B

    Deere 550H transmission pressure loss

    I was running my 550H in the dark and ran into a stump in 4th gear. Lost all gears and transmission gauge reads close to zero. I check underneath and didnt see any huge amounts of oil leaking out, but it was dark and I had to leave for other tasks. The machine is not in a user friendly area:(...
    • Bearhead
    • Thread
    • 550h 550h drive loss deere
    • Replies: 3
    • Forum: Dozers
  15. Schilde143

    John deere 35zts guage display

    I recently bought a 2003 john deere 35zts. Runs great but the display for the hour meter and fuel guage does not work. Looking to see if anyone has one for sale.
  16. J

    1968 John Deere 544 Steering issues

    Long story short I bught and sold and re-aquired my old JD 544 wheel loader. Transmission was loosing oil pressure so tore it down and rebuilt it with the help of the manual. Thing is, it was just the brake interconnect valve not release cutoff oil pressure to the trans. After the rebuild, the...
    • James Marks
    • Thread
    • 1968 544 deer deere direction john opposite steering turns
    • Replies: 4
    • Forum: Wheel Loaders
  17. B

    Deere 310G Backhoe

    Hey guys, Having an issue with my 310G backhoe. There is hydraulic fluid getting into my rear end, which is filling up and coming out the breather vent. I replaced the three seals on the emergency brake housing, but its still acting up. After replacing the seals, I put fresh fluid in the rear...
  18. S

    Deere 160D Fan Not Engaging

    Engine is overheating because hydraulicly driven fan is not cutting in. Replaced the fan drive motor already, anything else to look for? I'm assuming something electrical. Machine is a 2008 Deere 160D 10k hours. Thanks Guys!
  19. D

    MINI EX COMPARISON

    I am having a hard time deciding on a unit for purchase. Deere 60G (2015 $60k, 1500 hours), Cat 305.5 (2015 $73k, 900 hrs), Takeuchi 250 (2013 $43k, 1400 hrs) and few others in between. What should I consider that maybe I havent thought of! I have not operated a Deere mini on a jobsite but it...
    • DUNNER989
    • Thread
    • cat deere excavators kubota miniex takeuchi
    • Replies: 14
    • Forum: Excavators
  20. C

    Deere 450CLC timing issues.

    Hello everyone, hope your well. Not often that I use a forums for help, hate wasting the time of others on my problems. But it's becoming desperado at this point and I could definitely use the help of this all knowing community. The machine in question is deere 450clc with their all...
Top