John C.
Senior Member
Hi All,
I'm working on a Eidal shredder that has a Rex Roth axial piston hydraulic pump in a closed loop system that need some attention. It is a two pump system and one pump isn't putting out the same as the other. The slow pump had a repair done on it last winter and the machine had not been used since. Another company did the repair and basically is trying to wash their hands of the project and the customer called me to try to get the machine to work again. At any rate I'm looking for information on the pump control system to see if the flow can be adjusted. I have included a photo of the ID tag on the pump. The Rex Roth distributor is of no use and they only want to work on it themselves and will supply no information outside of selling a new pump. Any information provided will be greatly appreciated.
Thanks
I'm working on a Eidal shredder that has a Rex Roth axial piston hydraulic pump in a closed loop system that need some attention. It is a two pump system and one pump isn't putting out the same as the other. The slow pump had a repair done on it last winter and the machine had not been used since. Another company did the repair and basically is trying to wash their hands of the project and the customer called me to try to get the machine to work again. At any rate I'm looking for information on the pump control system to see if the flow can be adjusted. I have included a photo of the ID tag on the pump. The Rex Roth distributor is of no use and they only want to work on it themselves and will supply no information outside of selling a new pump. Any information provided will be greatly appreciated.
Thanks