Thanks alot Ryan
Ryan lady in your office gave me the # of someone in your shop but the connection was bad, the # was I have taken the controller box out of this 670 after i got a reman swing alternator on the machine and it is now putting out current but still no swing. I found some of the one-way resisters bad and replaced them, but I had a bad connection under the bottom board and had to take the top 2 boards up, there are several fiber spacers between all 3 boards but there are 2 metal spacers 1 between the top 2 boards and 1 between the 2nd and 3rd boards, when I lifted the 2 top boards off the 3rd, I didn't see what position this one came from. The 2 metal spacers have to conduct voltage between the plates. Would you or one of your mechanics happen to know? Appreciate the help either way.
I looked at the parts one on the shelf and didn’t see any metal spacers. The crawler ones might be different
I didnt know it had any until I started putting it bac together and felt the differences in weight.
The spacer with the white dot is between the 1st and 2nd plate. Pointing to the location where it goes.
This one with the white dot goes between the 2nd and 3rd plates, I think where I'm pointing in the last pic. When I looked in the parts book and seen it takes 2 I had to get the knife out and poke um to find the one still in place between the top 2 plates. Service manual doesn't show and called Terex direct and they can't tell from their files.