equip guy
Well-Known Member
- Joined
- Nov 17, 2010
- Messages
- 95
- Location
- Massachusetts
- Occupation
- Ag and Construction Equip mechanic
I know what you mean about work and mouths to feed. Is this the same engine you had a lttle while ago with the "fuel wash" problem with a few of the cylinders? I got that same D-Tac bulliten of the rusted VGT's. Do you know if they recalibrated the actualtor when they replaced the turbo? You would hope they would, but with so many parts swapped out in desparation you never know. The turbo can get screwed up instantly if they didn't do it before powering up as I'm sure you already know. Is the tier II in the 04-06 year? if so I might have that CTM for that engine. Actually It covers the 4 and 6 cyl engines. I can check the application guide tomorrow to see if that applies to your set up. If so I'll set you up for what ever you may need. Also let me know what level number for the system. Also I too had valve problems with one customers engine, I set the valves the same as you did. I just posted my problem for an actuator communication error on the agricultural equipment forum, should have posted on shop talk. Check it out and let me know your thoughts. Thanks