• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

terex

  1. K

    Just purchased a used 07’ Terex tc50. I cannot find the iso/ase control pattern switch.

    I just purchased this used machine and the controls are not what I am used to (iso) and it is throwing me way off as my brain just won’t learn the current pattern. I’ve read online that this machine has a switch to toggle between iso/ase but nobody says anything about the location and I’ve gone...
    • KCC50
    • Thread
    • excavator hand control pattern hand controls iso ase location mini excavator tc50 terex terex excavator
    • Replies: 2
    • Forum: Compact Excavators
  2. S

    Franna AT20 series 2

    Can anybody give us a hand. I have been trying to find a full workshop manual for a Terex Franna AT20 series 2 (levers not joystick), does anyone have one they could share please??
    • SMCTAC
    • Thread
    • at20 franna terex workshop manual
    • Replies: 1
    • Forum: Cranes
  3. Lawrence M Paige

    2006 Snorkel TB42 Suddenly Sounds Alarm and Will Not Start

    I Parked my machine for about 1 week and suddenly have a rapid beeping sound that prevents it from turning over, as if something needs to be resolved before it can commence the start process. Ground and platform ignition react the same. Ignition feels like drained batteries, but the batteries...
  4. Tom Sticpewich

    Terex Franna crane service info

    Hi all, I have service to do on a Terex AT-15 Franna and on the service sheet there is a couple of jobs I can find any info on in the manuals. “Adjust rear boom pivot bearings” “Change winch gear box oil” “Change winch brake oil” Can anyone offer some advice in regards to oil drain and fill...
    • Tom Sticpewich
    • Thread
    • at-15 crane franna service advisor terex winch
    • Replies: 3
    • Forum: Cranes
  5. D

    Terex TX760B Engine Fault Light

    My Terex, TX 760B has an engine fault light on. I topped off the oil, transmission fluid, hydraulic fluid, blew out the air filter. I still have the light coming on. Has anybody experienced this? Please help as I have a good size project on my property that needs to be completed. I’d also be...
  6. C

    help identifying a terex loader

    My brother and I are considering purchasing this front end loader. We know the steering pump is having issues and have been unable to identify this machine to price out a replacement. From what we can figure it is a 72-31 but cannot seem to find anything to confirm it. any help would be...
  7. T

    ASV R265 hydraulic whine

    Morning all. I have an ASV R265 with 1200 hours on it. The hydraulics is starting to whine when the oil warms up. This occurs when you are idling. If you go to drive, ie: push the stick forward very slightly the whine goes away. It's like the bypass valve is 'squealing' not the best description...
  8. J

    Dead Terex HML32, release brakes

    Hello, I was wondering if someone knows how you can release the brakes on a Terex HML32 (9 tons) wheeled excavator? It is not possible to start and I need to get it onto a trailer for transport. Not very familiar with excavators, so general experience on how this usually is done is much...
    • joakimeg
    • Thread
    • brakes hml32 no start terex wheeled excavator
    • Replies: 0
    • Forum: Excavators
  9. J

    Terex pt60 dies and wont start once warm

    I have a 2009 Terex pt60 that seems to run fine and starts up fine when it's been cold. but once I ran the machine for a couple hours the hydraulics and electrical start clicking then the machine dies. when I go to start again the gauges generally won't work and the machine just cranks over...
  10. M

    Terex 2306 forks don’t tilt with switch

    The forks will auto level going up with the boom but do not go back when lowering. They will not move at all with the switch. There is power and ground at the solenoids, the light’s inside the housing do light when using the switch. Any help is appreciated
  11. V

    Terex TA 30 OFF ROAD HAUL TRUCK

    Truck was running good, starting good. Killed it for about 30 minutes, went to restart it, it will spin but won't crank. Connected it to another battery, still just spins, won't crank. Any suggestions? Thanks
  12. RightTrack

    TEREX IBH 7251 Salvage yard?

    I think I have a Terex 7251 AA (the serial tag does not have a model number) (S/N 55167) and I was wondering if anyone knew where I could find a steering Gearbox for it. I've tried searching for salvage yards that might have one sitting around, but I had no luck. I'm almost leaning towards...
  13. S

    1991 Telelect Captain II Digger Derrick removal

    I will preface this post by saying that I don't have much experience with cranes, especially digger derricks. I recently bought a 1991 Ford F800 with a Telelect Captain II Digger Derrick pole crane. I have removed the boom and I am struggling to get the turntable to come off. The rotation...
    • Steven66
    • Thread
    • crane derrick digger gearbox removal telelect terex turntable uninstall
    • Replies: 3
    • Forum: Cranes
  14. A

    Terex R200S

    There seems to be a lack of information online for this skid steer. I am looking for as much info as possible for common issues and preventative maintenance. It was leaking coolant through overflow hose
    • AshtonL
    • Thread
    • coolant leak issues skid steer terex terex r200s
    • Replies: 0
    • Forum: Skid Steers
  15. Yazid Asaad

    Zf transmission issue

    Hello all We have a TEREX TA30 truck with serial number of A7751209 model of 1999. We have a problem of shock shift at 2nd to 3rd gear. We try to calibrated by AEB many time with different condition, but the same problem.( AEB give OK message). We changed the TCM with another truck TCM and...
  16. Yazid Asaad

    TEREX TA30 SHOCK SHIFT 2nd to 3rd gear

    Hello all We have a TEREX TA30 truck with serial number of A7751209 model of 1999. We have a problem of shock shift at 2nd to 3rd gear. We try to calibrated by AEB many time with different condition, but the same problem.( AEB give OK message). We changed the TCM with another truck TCM and...
  17. R

    Terex TC25

    Hi looking for help on a confusing problem My TC25 has developed a fault it started after a hose went and a replacement was fitted this was done by a call out engineer. At Normal operating speed the blade wont lift up it will power the machine up off the floor and then lower the machine but then...
  18. P

    Terex TA30 ZF 6WG 310 Transmission leaks

    I am chasing leaks on ZF 6WG Transmission. It looks as though the Gear Shift Housing (#1573838)(mounted to the upper right side of the torque converter case) is leaking. I suspect Cover #5 maybe leaking at gasket #6 Any ideas why this assembly would start leaking? Anyone have suggestions or...
  19. Yazid Asaad

    6WG-260 transmission , Terex TA-30

    Hi all I faced a problem with a 6WG-260 Generation 1 transmission newly overhauled and I really need a help. We replace K2, Kr, K3, and K4, we checked K1, Kv and everything looks okay. We also replace the torque coverter with a used one because of the overheated marks on the old one. After...
  20. wlhequipment

    Terex PT110 Forestry hydraulic problems.

    Hi folks, I mistakenly originally posted this in the “other earthmoving” forum; meant to post it here, so this is a bit of a repeat post, but at least now it’s in the right place. I have a Terex PT110 Forestry that is having really high back pressure on the return circuits of the high flow...
Top