• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

lift

  1. G

    Gehl dl10l dynalift

    Anyone have any experience with the main boom leaking down does it running or not. Stuck valve or switch maybe ?
  2. G

    Gehl dynalift dl12

    Looking for the compression specs for this lift it has the 4045t John Deere engine in it. Any info would be greatly appreciated thanks !
  3. T

    48 VDC hydraulic system. Looking for parts source

    Hello all, I am searching for a source for 48VDC 15W coils for a hydraulic stem valve. The coils on the machine are Sterling Hydraulics but I guess they've gone out of business. I think the bore is 13MM and the shaft length is about 40MM. I can order valves from a parts supplier, but I only need...
  4. A

    Case 580CK Loader Lift Hyd Cyl Replacement

    You all are a huge help everytime I come around. One of my lift cylinders has a dent in it which has rubbed a flat spot on the piston. The gland and rod are fine. I am having trouble finding a replacement cylinder. What companies would you all suggest checking for a replacement? Are there new...
  5. 1

    Genie Lift GS 2646 AV Low Voltage Error

    Hello, I'm having an issue with a Genie Lift GS 2646 AV I'm getting a "LO" Voltage error on the joystick screen, Replaced batteries and am getting 24V across all 4, fully charged Connected laptop to the GCON with SMART LINK Getting Errors: C052: Tilt sensor not detected C021: PCON not...
  6. B

    JLG 60HA does not power forward/back

    I have a 1995 JLG 60HA. It has lots of leaks, issues, and otherwise but slowly I am rebuilding and repacking the cylinders. Right now, the biggest issues is DRIVE and moving forward and back. I have limited skills, but here is what I know so far... 1. The pump was replaced with a refurbished...
  7. Bobcat Crazy

    Massey Ferguson 265 and 235 Questions

    Good evening Guys, I hope you are all doing well tonight! I have a few questions about the project tractors I just bought. I just got the 265 home today and I still have to return to pickup the 235 when the weather gets better. We are supposed to have about a 3 day snow and ice event starting...
    • Bobcat Crazy
    • Thread
    • 2 stage clutch lift massey ferguson 235 in-frame rebuild massey ferguson 265 hydraulic lift ring job
    • Replies: 34
    • Forum: Agricultural Equipment
  8. M

    Genie Lift z60/34 Slow Platform Controls

    I have a z60/34, from the ground controls all is normal and 'rapid', from the platform all controls are very slow. Where should I start looking. I'm thinking some safety, or wiring issue. Thanks Matt
  9. M

    GS 2668 RT - lifts very slow

    Hi everyone. I couldn't seem to find a thread specifically for scissor lifts. Hopefully it is ok here. I have a 1999 GS 2668 RT scissor lift. I bought from another construction company in town when they upgraded. It has a new motor and new hydraulic pump. Everything works great, starts and runs...
  10. T

    JLG E-400A no boom controls

    Hello everyone! Looking to get some advice for troubleshooting an e-400a boom lift. When the key is set to ground control everything works perfectly fine. When you turn to the boom controls, nothing works on the boom. There is voltage in the boom control box. I’ve tested the cable for continuity...
  11. CaptSkinny

    JLG 450A - valve ID

    I bought a JLG 450A that I think has some valves in the wrong position, or an incorrect valve installed. But the JLG part numbers in the manual don't match the numbers printed on the valves, which are Hydraforce part numbers (JLG's manufacturer for the OEM values), so I can't verify that they're...
  12. D

    Telsta A-28 lift truck identification

    Hello all. I recently bought a Telsta A-28 lift/bucket truck that needs work. I'm trying to gather info and I think I've found most of what I need. I've found inspection tags identifying it as an A-28, but can't find the original metal tag. My question: Are there features or specs that would...
    • Dubble
    • Thread
    • aerial lift bucket truck lift
    • Replies: 1
    • Forum: Cranes
  13. S

    JLG 40HA won't high idle.

    Hello, I have an older 1996 JLG 40HA lift that will not high idle. The lift has a ford vsg 411 engine, I recently replaced that engine due to it going bad, with an older style ford vsg 411 with points. I have it installed and the lift functions for the most part except it will not high idle, it...
  14. E

    Genie Controls Issue Puzzling

    Having a puzzling issue with a Genie 2632 electric scissor lift with Genie's Smart Link diagnostics box For some reason, Ground controls (GCON) works when key is turned to the right But when key is turned to the left for PCON nothing happens, no LCD, nothing. So we can have the lift go up and...
  15. Nate B

    Genie S-85 no 4X4

    I purchased a Genie S-85 4x4 from a Forklift outfit and it has worked awesome. It is a 2001 SN S80-2789. I use it in KS around my farm on flat ground and hadn't noticed the 4x4 working or not. We needed it on a different site and went to load it on a trailer. As I got up the ramps and the...
  16. D

    JLG 60HA Unable to use any controls from Platform plus engine dies

    I have a JLG 60HA. I haven't used it in a while, approx. one year. It worked fine when I last used it. It is a 2WD with Ford industrial engine. PQ controllers. The lift operates just fine from the ground. When I move the switch to platform, the engine slows to idle, the blue light on the...
  17. A

    Boom hydraulics replacement - twin line or two singles?

    Hey guys, long time lurker, first time poster. Anyway, I'm getting ready to re-run the boom hydraulic lines on my 1989 Grove AMZ-66 Manlift, as the originals have finally seen too much sun (polymer braid is showing at the elbows) and could soon fail. My question is this: Why should I pay extra...
  18. B

    Ford E-350 with ETI Boom Lift repair

    Hey everyone. I'm just starting out in the world of hydraulics but I'm no stranger to tearing apart many things mechanical. I'm not sure if this is the correct location for this topic either, but I'm going to give it a shot. I have a Ford E-350 cargo van with an ETI boom lift on it. I grasp the...
  19. blakej

    Liftall L60D Tow owners manual

    Ive been looking for an owners manual for a liftall L60D tow but havent had luck anybody know where i can find one?
  20. H

    Jlg t500j dead

    I have a jlg t500j 24v i was using it in my yard to cut down tree limbs i went up to a limb cut it down amd when i turned around all power was off so i figured i accidentally bumped the shutoff button so i pulled it out and nothing did this a few times before i realized i had to climb down some...
Top