• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. Pipevine

    Deere 310e no crank condition

    I've got a deere 310e with a no crank issue. Was running fine till I Parked it. Went to start , key and 3 electronics come on but will not crank. The fnr lever is in neutral. Upon climbing under the hoe I found a group of four wired that have been pulled loose from somewhere (black insulation...
  2. Pipevine

    Galion 104b engine swap

    Grader originally had a j-series cummins in it. Swapping an NTC-290 Cummins (out of a truck) in its place. Will I encounter any issues getting the clutch/housing switched over, or any other obstacles anyone can think of right off hand?
  3. Pipevine

    Deere 310e front hub locking up

    I've got a deere 310e mfwd. The right front hub is locking up. It will roll about two feet and then lock. I can reverse and it will roll a couple feet then lock. Everything else including the other side of the front axle is working properly. Anybody have an idea what the problem is?
  4. Pipevine

    Deere 310e front hub locking up

    I've got a 310e fwd. The right front wheel will turn for a couple of feet and then lock up tighter than a drum. If I reverse, it will turn for a couple feet and then lock up that way too. Anybody know what might cause this or how to fix it? The other side operates properly.
  5. Pipevine

    Galion hydraulic controls

    I've got a 118 galion and the hydraulic controls leak like hell. Is there anything I can do to help/fix this?
  6. Pipevine

    Galion blades

    Just bought a couple of galion blades one is just a 118, so I'm assuming its series A. The other is a 118 series ek 1. Cant find any info on a series ek 1. Can anyone point me in the right direction. I have a 104B now , what are the differences in the two?
  7. Pipevine

    Jd 310e cranks, won't start

    I've got a John Deere 310e with 4045 engine. I've never had any problems with the engine. It has fresh fuel filter and other fluid levels are good. The other day while using it it just died. Now it will crank but will not start. It will run on ether. And I confirmed that fuel is getting all the...
  8. Pipevine

    End dump question

    Just bought a 2000 trail king end dump. It's a full frame 3 axle spring ride except the lift axle is air up/air down. It has two separate valves one to release the gate latches and the other to air up/down the lift axle. The lift axle valve is plumbed to a regulator to control the amount of...
  9. Pipevine

    60 series water pump?

    I've got a 12.7L detroit 60 series. Checked my coolant level today, it was a little low but I could still see coolant in the radiator. Went to put a couple gallons of distilled h2o in and it ran out on the ground. It's coming out from somewhere above the bottom bolt of the water pump but I can't...
  10. Pipevine

    Cummins pt pump question

    Got a '66 gallion 104B with jnr100 cummins with a pt pump. I've got a Manual for type G and type R pumps but neither of those match what I have. My pump is leaking fuel between the mating surfaces of the throttle housing and main pump housing. Is there anything special I need to know before...
  11. Pipevine

    8.3 cummins fuel issue

    I've got an 8.3 mechanical cummins in a 95 L8000. It sat for about a decade before I got it. Drained the tank, fresh fuel. Replaced the check valve on the back side of the injection pump as it wasn't holding pressure. Everything was great smooth idle, good throttle response etc.....then it just...
  12. Pipevine

    Mitsubishi mg400

    Mitsubishi mg400. Does anybody know anything about these blades. Thinking about buying one for scrap price. Supposedly it's a '93 model. Owner doesn't know anything about it other than it doesn't run. I think it was on a property that he bought . Information online seems to be very limited on...
  13. Pipevine

    Rgn hydraulic pump question

    Can a gear driven hydraulic pump (ie rgn pump) be mounted with the ports vertical as opposed to horizontal? I tried this and while there doesn't seem to be any issues with the hydraulic side of the system , the gas engine that drives the pump is no hard to start.
  14. Pipevine

    Need new wet kit pump

    My wet kit pump crapped out on me. Pto Is a chelsea 489xqahx-a5xk. Anybody have any suggestions for a replacement pump at reasonable price?
  15. Pipevine

    Galion w/ cummins surging

    Started up the grader today (66 Galion 104b with cummins jnr100). Engine would surge sporadically. At first I had throttle response but after 15 or 20 min it quit responding to throttle and idled way down shortly thereafter and then died. Anyone have any ideas/ suggestions?
  16. Pipevine

    Pto question

    I'm going to replace the existing 10 speed (Rtlo14610b) in my truck with hey 13 speed(rto-12513) , can I use the same PTO on the 13-speed that is on the ten speed now
  17. Pipevine

    Jd 310e no power when in gear.

    I have a 99 JD 310e 4 x 4 extendahoe with just under 4,000 hours. And a few days ago it just out of the blue turned into a slug when you put it in gear. It's like it just does not want to go. And you can push the throttle to the floor and it won't get above 1500 RPMs.(makes no difference whether...
  18. Pipevine

    Cummins jnr100 info?

    Does anyone have a good source for manuals or information on Cummins jnr100? Also is there a different name this engine is more commonly referred to as? I'm also needing to Source information on a seal kit for the injection pump. Thanks in advance.
  19. Pipevine

    Td20b parts

    I have a complete td20 that was im good operating condition when it threw a rod. Everything else on the machine is good if anyone needs parts just message me for prices
  20. Pipevine

    Galion 104 series b questions

    Can anyone tell me how to check the hydraulic oil and trans oil level on this machine?
Top