• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. C

    Johndeer 5205. Rock shaft want lift

    Helping a neighbor out with a 5205 that has been sitting with hyd issues, finally getting around to trying to help him with it, did the basic normal stuff, drained the fluid an pulled out the strainer an it was clean, also changed out the spin on filter too. Also checked all the suction spots...
  2. C

    Johndeer 325a skid steer injection pump timeing

    Hey guys. Looking for some good way to reinstall the separate injector pumps on the power tech motor , serial is A137637. Well motor had been putting lil engine oil into the coolant, it was not the typical grey color after mixed, it was just spots of burnt motor oil threw out it. So I...
  3. C

    Bobcat 753 F series. All lites blinking on controller?

    Hey guys, helping out a friend, been haveing trouble off an on with his bobcat, his 753 F series operates decent for its age, but have noticed that if left idled up an flip the lap bar up then flip it back down the brakes want unlock, an when I look down an the interlock controller under my...
  4. C

    Kw t300 cat 3126e

    Hey guys my service trucks been giving me fits, 1998 t300 kw. Cat 3126e. Getting no codes ,cranks an runs, somedays does great on 45 miles to work, an outta no were it would start to spit an studder an then slowly flutter out dead, sometimes I can let outta the throttle and it mite catch back...
  5. C

    D57s want steer

    Helping a friend look at his loader , had been working operation is fine till after a hr or so then the right side would start turning around slow on that side, also can hear a lite chatter or growling coming from right side , Figured that the right side discs were shot, so we removed both...
  6. C

    Slow steering one side

    Helping my neighbor out with his komatsu D57E -1 serial number is 20163. After opperateing 45 min or so it seems to have right side slow steering. Can mash the left pedal down to the floor an can feel chattering or growling in the pedal when it starts to steer , while driveing it tracks...
  7. C

    Tl 230 series 2 Skid steer want start

    Hey guys, took in a tl230 for an engine rebuild, machine was brought to me an drug off the truck, basically pulled the motor an built it an reinstalled motor, tryed to start motor an it wouldn’t spin over, I have a schematic of the machine and a pdf file of the service manual, but there isn’t...
  8. C

    Tl 230 want start

    Helped a fella rework his motor, got it all Back together and can’t get the key to start it over, checked all fuses, key switch,relays, have traced power all the way back to under kick pannel above ur feet is were the computer is an few relays, found one with a tag on it. It says STIL on it...
  9. C

    Deer 644B loader want drive

    Hey guys , dealing with another dinosaur here, serial number is 209246. Well the loader had been sitting up threw the winter , we got it out an ran it for a wk an did well for its age. Well later in the day it had got to we’re it didn’t wanta drive. Like it try’s to pull but nuthin. I checked...
  10. C

    Johndeer 260 alternator wireing?

    Had my guy to pull the alternator off the machine, he said was fairly easy, BUT lucky me he didn’t mark any of the wires on it an now we’re both in the dark. Looking for lil help here. Machine had started blowing the accessories fuse (25 amp) Pretty much blows soon as engine starts up...
  11. C

    Takeuchi tl 230 series 2. Electrical?

    Hey guys, been helping a buddy on his motor that he was building, we reinstalled it an tryed to start it an it want turn over, got good grounds, checked fuses an relays, can manually jump the starter an it does work, checked key switch, would like to locate a schematic an repair manual .
  12. C

    Cat 830mb. (Ex military)

    Hey guys, our machine seems to be mixing oily substance in with the coolant, checked all the fluids an all that was low was trains fluid, hyd was ok,engine oil level was fine, trains was prob 3.5 gallons low, so I said maybe that was it, we topped it off an added some dye to the system an turned...
  13. C

    Case 580 super king

    Helping a friend out with his older case machine. Serial jjg0165745. All his hyd cylinders seem to drift down on there on, all cylinders have already been resealed except outriggers , but they seem to work fine an not drift down. Sometimes the front loader will hold on its on an sometimes if...
  14. C

    Buying johndeer Ann cat offline software

    Well been screwed again from Dang folks over seas, have done been the rd 3 times now dealing with heavy equipment software , Looking to purchase cat sis an ET along with johndeer service advisor , tired of dealing with jacklegs that want either help ya with there software issues or they just...
  15. C

    Cat 312cl bogging down

    Helping a friend out today , his machine is trying to bog down while opperateing, we have did all the regular stuff like change if fuel filters, checked air filters, removed banjo bolt at fuel hand primer an cleaned wash out screen, turbo is fine. One thing that is bugging me is that the...
  16. C

    Auto Crain issues. Kenworth t300

    Hey guys, I’m a field tech an put a truck together few yrs ago an been working outta it ever since, well the truck is a 1999 t300 kw, it originally had a derick digger body on it an it belonged to the power company, (use to sit lite poles). Well I removed the digger body an installed a stahl...
  17. C

    Jlg/gradall g6-42a

    Hey guys looking to see if there’s any kinda of parking brake adjustments on this lull, it has the integrated internal brakes an they work great, but when application of electric parking brake applied the lull want hold itself, I do believe that the parking brake is spring applied when button...
  18. C

    310 c shuttle trains issues 2wd

    Hey guys I got a back hoe that I’ve had the shuttle reverser out 3 times now over couple yrs, Well the tractors rarely used on the farm an sits a lot, first time I had it out I had went threw it an replaced all blocking rings, clutch piston seals,clutch discs,clutch plates basically all the...
  19. C

    Bobcat 863f Ex-3 code

    Hey guys, getting puzzled here with an ole one, drug an ole loader outta the woods an helping a friend out with it, it has a deutz motor in it (just lovely I know). Well it starts an runs fine. Want boom up north tilt, try’s too Lil but nuthin, the inter ppc want lite all the green lites up...
  20. C

    New Holland lx865 injection pump replacement?

    Hey guys, I’ve seen multiple write ups all over the internet!!! No real good advice for changeing out injection pumps on the 332t 3 cylinder. Even called my local dealer today an he said that I was like the 3rd guy this month that’s called asking for advice on how to do it. Basically he told...
Top