Tags
Senior Member
Ok new issues if I run the machine with the heat on full blast for about 30 mins machine functions normally any ideas
With the heat on it is drying out a wet connection or drying a wet relay
Ok new issues if I run the machine with the heat on full blast for about 30 mins machine functions normally any ideas
I figured that, just was hoping someone could point me towards what connectionWith the heat on it is drying out a wet connection or drying a wet relay
hey. i'm listening. thanks. i will open mine up and check the solder.I know that nobody is listening, but, if smacking the machine panel makes it work, this relay unit needs opened up and the cold solder joints need resoldered. I believe my TL150 machines have two of these. The other relays dont come apart, or look different. The ones that look exactly like this are the problem.
Or, you can buy the relay, only to have it happen further down the road. They're only $60 apiece. I've never been back in on any that I've soldered.
View attachment 199949 View attachment 199950
I opened up both of my relays. The circuit board looks different than yours. And I can't see any cracks in the solder. I may just reheat the solder joints anyways.I know that nobody is listening, but, if smacking the machine panel makes it work, this relay unit needs opened up and the cold solder joints need resoldered. I believe my TL150 machines have two of these. The other relays dont come apart, or look different. The ones that look exactly like this are the problem.
Or, you can buy the relay, only to have it happen further down the road. They're only $60 apiece. I've never been back in on any that I've soldered.
View attachment 199949 View attachment 199950
I resoldered anything that looked questionable. Hopefully it works. But where can I buy these?Even with you're out of focus (fuzzy when zoomed) image, I see at least one cold (cracked) joint.View attachment 200002
I have a TL150 which starts then sometimes the hydraulics would work after 10 minutes of warming up, then it became 20 minutes, then 45.., now not at all. I'll try your advise on 8/16 and see if re-soldering the black relays is the solution. Thx.I know that nobody is listening, but, if smacking the machine panel makes it work, this relay unit needs opened up and the cold solder joints need resoldered. I believe my TL150 machines have two of these. The other relays dont come apart, or look different. The ones that look exactly like this are the problem.
Or, you can buy the relay, only to have it happen further down the road. They're only $60 apiece. I've never been back in on any that I've soldered.
View attachment 199949 View attachment 199950
What does yours look like?I have a tl 140 that's doing the same thing starts but nothing works how do you determine witch relay is the safety none of the pictures posted look like what I have
@tool_king I just bought a 2004 TL 130 yesterday. Ran fine when I bought it, loaded it on the trailer and now nobody is home at the controls when I got home from hauling it to unload. Thinking it's this relay thing since I've checked the switch already. If you'd be so kind when you have a minute please email me any owners manuals and workshop manuals for this machine. I've got to fix a couple of rollers and need to find this relay people are talking about so I Thankcan get it off my trailer! Thank you sir. bee_morris@hotmail.comWhat is your email address .When I send them to you download them to your computer .
It's one of the two on the far right.Hey guys I've been trying to figure out what relay may have a cold solder broken. Anyone know which one in the line is the one that controls the joysticks? Thanks.