What a complete jerk.
Must have lost the bid on the skid-steer or else that would be riding sidesaddle on the tongue!What a complete jerk.
Something surprised me today. I weighed out (leaving empty) at the local dump at 13,860. 2022 F350 crew cab, long bed, diesel with a 7x16 dump trailer. I figured 10-11 range.
Application on that thing ^^^^^^^
Big ship maybe?
I’m late to this one….judging by the position of the front wing dolly and the position of the rear dollies I’d say they got things in a bind and the weak link was that jeep. There isn’t any auto steer on a 19 axle and you can sure get them wadded up overloading certain points.Apparently this happened today about 25 minutes from my house
View attachment 267681 View attachment 267682
The article said it was a press base moving from Flint to Battle Creek for repairs.
The jeep collapsed during the turn, blocking most of M66.
331,000 pound load.
I’m late to this one….judging by the position of the front wing dolly and the position of the rear dollies I’d say they got things in a bind and the weak link was that jeep. There isn’t any auto steer on a 19 axle and you can sure get them wadded up overloading certain points.
I have the same skid loader (going to sell it, having bought larger one)Happened across this, the beam weighs about 2800 pounds. I think this is proof of the old adage "God looks our for fools and drunks." I was fascinated with the structural capacity of sheetrock screws building the frame. You can skip much of it and still get the gist. You do need to watch the last couple of minutes when he discusses his "Safety/DOT" measures.
I wonder if his DOT could issues a citation based on his admissions in the video.....
IIRC that was a 1953 H-3 that I bought (for that job, and then sold it quickly)AW, No Fair, supposed to use a Farm Tractor with Leak Down Hydraulics and a Make Shift Pipe boom to do that!!!
Interesting that once things got tight, everybody stood around watching. In the woods, things get that tight and everybody is looking for a hole to duck into and cover up. Personally, I would have been headed to the other end of then pier. Quickly...Over loaded the Bollard. Not a truck overload.
https://www.linkedin.com/posts/eric...o-walkabout-activity-6962401659079593984-5tT4