Slight set back, completed hooking up the coolant hoses and filled the radiator and then drained the radiator one hour later. Sprung four leaks on four tubes about five inches down
from top header. Removed and unbolted tanks and drove to Pasco with the core yesterday. Radiator shop called and quoted me a price from the radiator builder in B.C. Then I get a
call back telling me it's only a 1/2 tube 4 row core, mine was 3/4 tube 4 row. A while later I got a call back, they can build me a 1/2 tube 5 row for the same price quoted the
first go round. Plus the five row will cool better than the 3/4 tube 4 row. Apparently it will slightly slow the flow and with greater offset on the tubes the air flow will have a better
effect on the surface area of the tubes according to the builder. Win some lose some, and then win some again.