ianjoub
Senior Member
IMO, from experience, Bosch blades cut better...
I like to use the carbide grit blades.
https://goo.gl/images/LELYTE
IMO, from experience, Bosch blades cut better...
And grease.
and a groove in the new pin ... and a zerk fittingAnd grease.
...snip...
Its only being held in the center and cutting the pin will allow me to remove the quick attach, but I'll still have the same issue. Unable to get it in a press because this is the end of the loader arms. I have some thick wall pipe which may be able to use between jack and other side of loader arm.