1. Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
  2. ALL NEW MEMBERS READ THIS FIRST!! Thank you for joining Heavy Equipment Forums! If you are new to forums we communicate with "Threads", please search our threads to see if your topic may have already been answered and if not then click "Post New Thread" in the appropriate forum. This will allow all of our members to see your question and give you the best chance to be answered. After you've made a number of posts you will graduate to Full Member status where you'll see a few more privileges. Following these guidelines will help make this the best resource for heavy equipment on the net. Thanks for joining us and I hope you enjoy your stay!!

JLG 40F manual

Discussion in 'Forklifts/Telehandlers' started by sportnatic, Aug 3, 2016.

  1. sportnatic

    sportnatic New Member

    Joined:
    Aug 3, 2016
    Messages:
    3
    Location:
    ny
    Need a manual for a JLG 40F
     
  2. boomtech

    boomtech Member

    Joined:
    Nov 1, 2016
    Messages:
    21
    Occupation:
    Owner:AERIAL EQUIPMENT SERVICES LLC
    Location:
    Quakertown,PA.
    What do you need,parts,service? Also what valves are in it...racine,moog,bertea or FPS...I have a ton of old F model stuff let me know....Bob
     
  3. helicemb

    helicemb New Member

    Joined:
    Nov 17, 2016
    Messages:
    4
    Location:
    montreal, quebec.ca
    JLG 40f

    I also have a JLG 40F and I have problems with some commands no responding. I suspect the wiring or electrical componants and/or hydraulic issues. The Equipment dont backup and does not turn right. I would appreciate the wiring and hydraulic diagram.....or the service manual.

    Thanks a lot...michel
     
  4. boomtech

    boomtech Member

    Joined:
    Nov 1, 2016
    Messages:
    21
    Occupation:
    Owner:AERIAL EQUIPMENT SERVICES LLC
    Location:
    Quakertown,PA.
    call me if you cant figure it out....no worries 267-864-8352 Bob aka:boomtech
     
  5. boomtech

    boomtech Member

    Joined:
    Nov 1, 2016
    Messages:
    21
    Occupation:
    Owner:AERIAL EQUIPMENT SERVICES LLC
    Location:
    Quakertown,PA.
    Ok fellas...just got out of the hospital and have like 20 numbers in my phone that i dont know....so hit me up again
     
  6. OFF

    OFF Senior Member

    Joined:
    Sep 30, 2009
    Messages:
    764
    Occupation:
    HD Mechanic/Shop Foreman
    Location:
    Alberta, Canada
    If you guys still need JLG 40F manuals, send me a PM. I've got them on PDF files
     
  7. Michael R. Rivera

    Michael R. Rivera Member

    Joined:
    Feb 7, 2017
    Messages:
    6
    Location:
    Canada
    Can you give more details? Do that we give the description for the question asked.
     
  8. John Barnett

    John Barnett New Member

    Joined:
    Oct 29, 2018
    Messages:
    2
    Location:
    Jonesboro, IL
  9. John Barnett

    John Barnett New Member

    Joined:
    Oct 29, 2018
    Messages:
    2
    Location:
    Jonesboro, IL
    I recently purchased a 1980 JLG 40f and am looking for the manuals to troubleshoot some electrical as well as a service manual as the main extension cylinder needs to be resealed. I have seen that a few members on here have the manuals in PDF version and if they are willing to share those I would appreciate it.
     
  10. D. Allen

    D. Allen New Member

    Joined:
    Jan 15, 2019
    Messages:
    1
    Location:
    Oregon
    Have need of readable wiring schematic, Wisconson, 2WD, Racine
    Still available?
    Thanks, dandysan99@gail.com
     
  11. Asa Tower

    Asa Tower Member

    Joined:
    May 14, 2019
    Messages:
    5
    Location:
    Wayland ny
    Do you still have jlg 40f manuals??
     
  12. OFF

    OFF Senior Member

    Joined:
    Sep 30, 2009
    Messages:
    764
    Occupation:
    HD Mechanic/Shop Foreman
    Location:
    Alberta, Canada
    Welcome
    Yes, I do. Just send me a private message with your email address on it.
     
  13. OFF

    OFF Senior Member

    Joined:
    Sep 30, 2009
    Messages:
    764
    Occupation:
    HD Mechanic/Shop Foreman
    Location:
    Alberta, Canada
    edit your response and take out your email. I've got it.

    Manuals have been sent
     
    Last edited: May 14, 2019
  14. Asa Tower

    Asa Tower Member

    Joined:
    May 14, 2019
    Messages:
    5
    Location:
    Wayland ny
    Thanks very appreciated
     
  15. BLUEGUMRANCH

    BLUEGUMRANCH New Member

    Joined:
    Apr 22, 2019
    Messages:
    2
    Location:
    Herald California
    Anybody have a jlg 40g manual, I got my hands on a 40 series manual but turns out it's for a 40f and most things are different.
     
  16. Asa Tower

    Asa Tower Member

    Joined:
    May 14, 2019
    Messages:
    5
    Location:
    Wayland ny
    Need help please!! Jlg 40f
    Back story- drive, up down and rotate was bogging motor down so pulled filter out by Bertea valve, cleaned put back in. Still bogged down, so I unhooked some lines looking for small inline screen filters with no luck. Fired it back up and now have no bertea valve operations.
    Tried bleeding some lines close to the valve, played with the flow divider a bit, let it run for quit a while. Found that if I had high idle and high speed on I could get all my movements but only if I’m driving forward and back.
     
  17. Puggles

    Puggles Member

    Joined:
    Mar 10, 2020
    Messages:
    7
    Location:
    Kansas
    I need a wiring schematic for a 1979 jlg 40f boom lift I can't find one anywhere
     
  18. OFF

    OFF Senior Member

    Joined:
    Sep 30, 2009
    Messages:
    764
    Occupation:
    HD Mechanic/Shop Foreman
    Location:
    Alberta, Canada
    Hi, any idea what kind of controllers your machine has? What kind of control valves? I'll send you the manuals as a starting point.
     
  19. Puggles

    Puggles Member

    Joined:
    Mar 10, 2020
    Messages:
    7
    Location:
    Kansas
    Not sure yet it had a propane powered engine but has been replaced with a gas powered engine just finally got the engine to run. I will update you when I get off work Wednesday. Thanks for your help.
     
  20. OFF

    OFF Senior Member

    Joined:
    Sep 30, 2009
    Messages:
    764
    Occupation:
    HD Mechanic/Shop Foreman
    Location:
    Alberta, Canada