DMiller
Senior Member
Decided after some Honey Do's was time to get the leaky cylinder OFF the hoist. Started at 11:30 sitting drained and capped at 2. Had a SLIGHT issue with the @#&%@&&&!! Spring pin retainer for the ram Eye pin, froze SOLID, next up, gas axe melt away the ends and will deal with that later. 7/16x 2 1/2 Spring Pin.
I do not have a Chain wrench long enough to drag the Cylinder head nut off, considering welded hammer lugs and drive it loose then drive Back tight and then cut them away.
I do not have a Chain wrench long enough to drag the Cylinder head nut off, considering welded hammer lugs and drive it loose then drive Back tight and then cut them away.