707pc50
Well-Known Member
I currently have a pc50 that I run a bobcat brand auger on, it works fine, turns fairly slow, but still does the job at drilling holes. The guy i bought the auger from bought it for a bobcat 8000b class mini ex. I am not sure the model. I am now looking for a newer smaller machine, considering a pc35 8000b komatsu mini ex. I would like to use this auger on this machine if I buy it, just am curious if anyone has an opinion on if this machine will turn the auger ok. I see that the pc35 is a 28hp engine, not sure what my pc 50 is but i assume it is more hp but it also is a old machine that probably isn't putting out the hyd pressure it should, and not sure the hp that the bobcat this auger was originally on was...
what do y'all think, the hoses and mount will take some work, and I haven't bought the smaller komatsu so I can't try it out on the machine, but an auger is essential for me.
what do y'all think, the hoses and mount will take some work, and I haven't bought the smaller komatsu so I can't try it out on the machine, but an auger is essential for me.