• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

no power

  1. 5

    D6N torque converter no power

    Hi, Can anyone provide further advice on identifying the cause of a power converter issue on a D6N (ALY2066-up)? The machine has around 15,000 hours on the clock and lacks the power to drive in gears above 1.5F under load. The stall test also fails in gears above 1.5F, and the converter output...
    • 5111
    • Thread
    • cat d6n transmission no power torque converter
    • Replies: 8
    • Forum: Dozers
  2. C

    Dt466 boost

    Dose any one know to check how much boost a manual dt466 turbo is outputting and how much it should be pushing out, I've heard alot of different answers like 25-30, 40-45lb on stock trucks, im assuming 30lbs is right but I'm not sure, also it's having a problem of not spooling up at all I've...
  3. T

    2007 International 4300 Durastar no power on freeway

    I have a 2007 International 4300 Durastar with a DT466 engine. Recently I can't go any faster than 35-40 MPH on the highway unless I'm going downhill. It feels fine just driving around town. I changed the fuel filter cartridge and put new batteries in which cleared all of these codes...
    • TorchHypnosis
    • Thread
    • 4300 dt466 durastar fuel delivery international no power
    • Replies: 48
    • Forum: Trucks
  4. M

    Case 450 crawler 188 engine, no power

    My older crawler is suffering power loss, surges and vibrates at higher speeds starts ok, white smoke, when pushing just no push! I cleaned out fuel tank 2 years ago. lightly used over last years. Rebuilt torque converter, rebuilt injector pump. Going to change fuel filters? Any suggestions?
  5. L

    CAT 977L No power

    Hey, I have a CAT 977L and I changed all the fluids, filters and fixed the leaks. I also adjusted the breaks-linkage and clutch linkage. I used it for 2-8 hour days with no issues but suddenly i lost power in the transmission -speed, torque in forward and reverse. what should i look for in...
  6. A

    Hitachi ZX 160 LC Year 2003 bogs down, looses power and stalls

    Hi, I am having problem with my ZX 160 LC 2003, engine is running well and starts really well, when I start using Boom and bucket especially multiple functions at the time it looses power and bogs down, even starts to stall. Its even hard to lift filled bucket while using only 1 function. It...
    • Arthur_P
    • Thread
    • bogs down hitachi looses power no power zx 160 zx 160 lc
    • Replies: 42
    • Forum: Excavators
  7. M

    T190 bogging down

    So I own a 2009 T190 and it's bogging down almost all the time. Even idling it'll cut out then come back to full power for a second. Then cut out again, whether I'm idling, driving, or turning power goes back and forth.
  8. R

    953C No power

    My 953C has no power. Motor sounds fine and revs good. I changed the fuel filters and fuel separator but still has no power. I have called my mechanic but can't get to me for a few days. Any ideas?
Top