• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

manlift

  1. T

    SkyJack SJ-7027 Needs to be jumped to start, then will operate for a min or so before it sits in idle.

    Hello, I have a SJ-7027, serial number: 31911. Recently it started needing to be jumped to start and then it would drive forwards or backwards for a min or so and even go up and down before it just sat in idle. It won't drive or go up and down anymore after about a min of run time. I've...
  2. A

    Calavar Condor 38A electric man lift - drive functions are weak/failed

    Hello, I recently bought a Condor 38A 36 volt electric boom man lift. The drive functions are not operating very well, if at all. All the lift functions and steering functions work perfect. Lift, extend, 2nd lift arm, steering, bucket tilt all work. When activating the joystick, I hear/see...
  3. T

    48 VDC hydraulic system. Looking for parts source

    Hello all, I am searching for a source for 48VDC 15W coils for a hydraulic stem valve. The coils on the machine are Sterling Hydraulics but I guess they've gone out of business. I think the bore is 13MM and the shaft length is about 40MM. I can order valves from a parts supplier, but I only need...
  4. T

    UPRIGHT AB46Electric Brakes will not release

    Hello all, I am new to lift ownership and bought a bit of a project. most everything functions on the lift except I cannot get the brakes to release. They will release if I apply pressure with an auxiliary pump but of course it will not stop without a quick jog around the machine. I believe it...
  5. C

    Genie 34/22

    hi just wondering if anyone out there has any thoughts on this, have a genie articulating boom with a Kubota gas engine. thing is a thorn in my side, got in this morning and kept dying on our delivery driver, and acting weird, platform controls wouldn't work, sometimes it wouldn't start they...
  6. P

    Grove MZ46c manlift engine trouble

    I hope someone might have an idea on the problem I have with my old MZ46c manlift. It has started to run a little rough and only runs for about 15 to 20 minutes then it revs up to above the high speed range then dies. After a while or over night it will start again. In hot weather it doesnt want...
  7. T

    Skyjack Manlift - Sensor Bar

    Does anyone know about sensor bars on manlifts? (The sensor bar is a long yellow bar right in front of the control panel on the bucket...if the operator bumps into it, it disables power to the bucket except for emergency power). I'm trying to find out if they were put there as a result of any...
  8. B

    JLG 60HA does not power forward/back

    I have a 1995 JLG 60HA. It has lots of leaks, issues, and otherwise but slowly I am rebuilding and repacking the cylinders. Right now, the biggest issues is DRIVE and moving forward and back. I have limited skills, but here is what I know so far... 1. The pump was replaced with a refurbished...
  9. F

    Genie z45/22 manlift only one wheel turns

    HI : Hope someone can help/ I picked up a Genie Z454/22 manlift at auction. I have most everything working other than only one drive wheel will spin. THe other one literally seems locked up THe one that moves i can nudge back and forth a little bit . THe other is frozen solid. I put it into...
  10. N

    Genie GS-1930

    first it beeps and won’t drive but if you raise up it will drive and stop beeping but when you come down it beeps and won’t work, now it will only raise up some times and keeps beeping and when it goes up it drops itself back down
  11. H

    Grove AMZ46ne Questions

    Hello, i bought a Grove electric articulating boom lift knowing it needed some work. This is my first all electric lift and i have a couple questions. First, its a 48 volt lift and it didn't come with batteries, so i hooked up four deep cycle car batteries to see what would work and what...
  12. P

    need manual for Grove T66J Manlift

    I just purchased a late 1990's Grove T66J man lift. The unit sometimes goes into a very high idle when moving the lift or basket then cuts out. I assume there must be a rev limiter that shuts the engine down when in high idle. Now, when I try and start the unit from the ground it immediately...
  13. D

    Genie S85

    I have a 2000 Genie S-85 dual fuel gas/propane 4x4. It got loaded on a lowboy and brought to a job and unloaded. The next day my guys went to start and when trying to start it would try but just wouldn't fire. When it would try fire the machine would start moving forward. once we took the...
Top