• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

calibration

  1. J

    650J john deere calibration problem

    I have a 2006 650 J that needed to be calibrated, at the end of the first stage of calibration it throws a F359 code. This code is tied to the DExcelerator pedal, according to the diagnostics the low settings on the pedal may be just a little out of range. This may or may not be why it's...
    • JSLtrucking
    • Thread
    • calibration dozer john deere
    • Replies: 1
    • Forum: Dozers
  2. Quki22

    Cat 277c TPS Calibration Issue

    I have been following several of the TPS threads but have not found a resolution to a recalibration issue. I took my 2008 cat 277c JWF01714 to the local cat dealer for the travel speed slowing to a stop. I provided them the service bulletin regarding this known TPS issue and for what ever reason...
  3. xxwestroxx

    1996 JD 850c calibration?

    Can any please post how to calibrate JD 850c. I have Changed sensors in the back bottom of Dozer. F621 code never goes away. Does 850c calibration fix this? Unit stops moving completely and says return to neutral. Stuck in mountains. In the Yukon. Thanks...
    • xxwestroxx
    • Thread
    • 850c calibration johndeere
    • Replies: 4
    • Forum: Dozers
  4. H

    CAT312L show the "CAL" on monitor

    Hello guy I met the problem with the "CAL" show on the top right corner of the monitor. And I can't see other info on the monitor anymore only the word "CAL". This problem is on 312L. Please check my images for mores details. Thanks.
    • Hai
    • Thread
    • calibration cat
    • Replies: 0
    • Forum: Excavators
  5. H

    Governor Actuator Calibration on Cat320

    Hello this is my first post on this site. I hope all of you can help me. I have Cat320 (7GJO1327) and I want to know How to calibration the Governor Actuator ?
    • Hai
    • Thread
    • actuator calibration cat governor problem cat 305
    • Replies: 10
    • Forum: Excavators
  6. B

    320B Speed sensor calibration problems

    Hi all, First time posting in the forum. Read a lot on here and learned a ton, really appreciate everyones tips and advice. Im just getting into machines out here in Hawaii and learning a lot from everyone I can. Have a 320b that having trouble with the speed sensor calibration. The old...
    • bcole4
    • Thread
    • 320b calibration flywheel monitor prv speed sensor
    • Replies: 11
    • Forum: Excavators
  7. R

    PRV Calibration for Cat 317N excav.

    Hi all. I have this 317N Cat excavator who's giving me a hard time on troubleshooting the hydraulic system. The problem is that on some hydraulic circuits, the hydraulic pump stalls the engine, such as the under carriage, and boom lift cylinders, while on the other circuit such as the bucket...
    • Rodgale
    • Thread
    • calibration cat excavator power prv stalls
    • Replies: 4
    • Forum: Excavators
  8. J

    Genie S-105 Speed Calibration

    I have got a Genie S-105 lift, I am experiencing Boom Speed Calibration errors. Error text are as follows: 1. Primary Boom UP/DN Speed not Calibrated. 2. Primary Boom EXT/RET Speed not Calibrated. 3. TT Rotation Speed not Calibrated. Manual says that automatic speed calibration is required so...
    • Jwd
    • Thread
    • calibration genie mewp
    • Replies: 0
    • Forum: Cranes
Top