• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

bulldozer

  1. B

    Does D10T Ripper fit D10T 2 ?

    Does the D10T dozer Ripper fit D10T 2 dozer?
  2. G

    Need Owners and Parts manuals for 2006 CAT D5G LGP

    Hello, I'm just requesting for the owner's and parts manuals for a 2006 CAT D5G LGP. Can I receive any pdfs, free sites or the like? I would rather not pay. Thanks!
  3. A

    D6R transmission issue

    Got a D6R serial prefix 3ZN shifts into neutral sometimes when travelling in forward or reverse. There are 3 active codes, brake pedal sensor, torque convertor output speed sensor and priority valve. Also notice the lights on the dash flash off and on and gauges sweep the same as when your turn...
  4. P

    D6H transmission overheating

    Hi all, Trying to sort out an overheating transmission on a D6H Serial No. *2KD00564* for a buddy. The history of the machine as I’m aware of it is as follows: He bought the machine, put it on his lowbed, and when they tried to offload it, catastrophic clutch failure in the transmission...
  5. A

    D6R Driveshaft yoke removal

    Hello need some help with regard to procedure to remove transmission yoke for driveshaft. Yoke moves a little but would not slide fully out.
  6. J

    Turning track bushings yourself

    Does anyone out there turn their own track bushings? Or am I the only one crazy enough to want to do so? If anyone does so I would love to know what set up is being used and where it was bought, or how it was built. I have been scanning the web and haven’t stumbled across anything yet.
  7. R

    d5k temperature

    Since I bought my machine I was in doubt if there was any problem with the engine, thermostatic valve, as it always rose in temperature. So I changed the thermostatic valve, washed the radiator, checked the radiator helix belt, nothing worked. So I put the device on and forced the machine for 2...
  8. Pep Joe

    C9 Cat engine performance without FLS, FTS and injectors trim code programmed

    What is engine performance without FLS and FTS codes programmed and without injectors trim codes programmed? Am asking cos today i connected a Cat ET to a C9 (sn:thx00719) and found they were not programmed. Engine working fine but has active codes for the none programmed parameters. the engine...
  9. P

    JD450

    My 450 crawler loader just had a new clutch pack installed by a heavy equipment repair shop. The day after he returned it to me I ran it and found out it is really difficult to steer (when it decides to steer at all !!). Should an old (70ish) machine be this difficult to steer ?? The repair...
  10. C

    H&R Construction Equipment Parts Sold To All States Ag Parts

    FOR IMMEDIATE RELEASE Contact: Terry Burkart 515-867-8558 [email protected] ALL STATES AG PARTS HUDSON, WI – April 14, 2020 – All States Ag Parts, LLC announced today that it has acquired H&R Construction Parts. With the acquisition, All States Ag Parts, will become a one-stop...
  11. M

    John Deere 450 B help please

    i bought a John Deere 450B recently, I have a few questions about it if somebody could please answer them. How do I tell what year it is ? I tried the serial number tag right below the seat and couldnt find anything. The Next question are the steering clutches in this machine wet or dry ? If...
  12. GusD

    Kelly type ripper on this CAT D9G?

    Hello, Does anybody know if this is a Kelly type ripper on the CAT D9G in this video? Thanks
  13. GusD

    Is it a Kelly type ripper on this CAT D9G?

    Hello, Does anybody know if this is a Kelly type ripper on the CAT D9G in this video? Thanks
  14. Rick Walker

    CAT D5G LGP - Will not turn right or left

    Good evening! I am currently working on a CAT D5G LGP Serial #FDW00813 I had front pump left track motor failure, new pump installed. I have forward and reverse movement but machine will not turn right or left. When trying to steer I get logged event codes: E484 (3) Unexpected left track reverse...
  15. dozerin

    New technology HBXG Bulldozer launching in India

    Hbxg dozer functions like hydraulic dozers through their feature of pilot joystick hydraulic control and hydraulic direct drive motors. These advanced and latest technology hydraulic dozers equipped with elevated sprocket and Cummins engine for better performance than the other dozer models...
  16. dozerin

    HBXG Bulldozer

    Hbxg dozer functions like hydraulic dozers through their feature of pilot joystick hydraulic control and hydraulic direct drive motors. These advanced and latest technology hydraulic dozers equipped with elevated sprocket and Cummins engine for better performance than the other dozer models...
  17. Matthew Stetar

    Finally found the one!! Newest Toy!!!

    Alright guys, i'm new to the site but been around heavy equipment my entire life. and been slowly building my very own empire of dirt movers for some time. I've been looking at getting into a D4 or D5 size machine with a winch and an angle blade. i love Caterpillar but can never seem to find one...
  18. T

    4N Grouser bars

    Anyone use grouser bars for worn bulldozer tracks? http://www.4ncorp.com/products/heat-treated-grouser-bars/
Top