-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
Nige
Senior Member
Single or multi-shank.?
What Part Number is on the data plate of the D10T Ripper.?
If you don't know that what Serial Number of tractor (RJGxxxxx) did it come from.?
What Part Number is on the data plate of the D10T Ripper.?
If you don't know that what Serial Number of tractor (RJGxxxxx) did it come from.?
Be very careful here.
Not all is what it seems with pitch and ram length,so don’t jump into something until you’re absolutely certain.
With respect,the lack of information you’ve supplied here,suggests you’re not too well up in the subject
Not all is what it seems with pitch and ram length,so don’t jump into something until you’re absolutely certain.
With respect,the lack of information you’ve supplied here,suggests you’re not too well up in the subject
Welder Dave
Senior Member
OP may have been thinking it was a more simple answer but with the cost of a D10 ripper you want to be sure.