• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Search results

  1. S

    Tandem pump L 190 2007 leak at top of spool valve

    l 190 New Holland , on tandem pump left hand control, oil seeping out of shaft containing spool valve going into the pump .do you have to pull pump or is it accessible from outside pump.how do you repair? Thanks any help appreciated.
  2. S

    new holland 555e backhoe loader curl and dump problem

    In a sort of bind , Don't get much snow in my area , but do now I've got to remove snow off hill where I travel back and forth to home. Got in backhoe started up . let warm for 15 min. raised loader up then went to dump snow out of bucket and the bucket tries to dump but the control stiffens up...
  3. S

    new holland 555e perkins diesel idling rough

    Got a 72 hp perkins engine idling rough white smoke when you throttle up then engine smooths out and no smoke. I have cleaned the air filter air seems to be ok as i ran with filter out at idle and it did not smooth out . anyone have any thoughts on what I might check are do to help the problem...
  4. S

    1997 new holland 555E

    I recently got a 1997 555E NH ..Can anyone give me advice on procedure to remove boom cylinder .Got to have rebuilt.I do not have a service manual. any help would be appreciated. How to position backhoe and pin removal and support devices needed to keep boom in position. Thanks
  5. S

    Looking at buying deere 310 j 4wd what should I consider

    I have been on skidsteer forum mainly .sold my ctl and now going to a 2008 rental unit deere 310 j 4wd 3500 hrs. I am certainly a avid believer in this forum and do respect all the experience and knowledge this site offers both novice and experienced ones. Question :what should I be looking...
  6. S

    Back up alarm on T 190

    I have replaced backup alarm horn on rear of bobcat. I occasionaly go to back up and it will work, but most of time it will not. I have followed instructions on setting contactors on bell crank , could I have faulty switch or switches. I have ohmed out the switches and they appear to be...
  7. S

    back up alarm t 190 bobcat

    I have been trying to get back up alarm functioning. I replaced back horn system as it was rotted. At first would work occassionally for a short period of time. so using manual . I set switches as recommened, noticed that orange wire was calling on the left side to be attached to common as...
  8. S

    T 190 2007 bocat track Single thump on left track on 360 degree rotate on sprocket

    Willie 59, I'm Just turning 70 yrs old . using your method of pipes to change out tracks did it by myself. So certainly glad for your post because they wanted $ 400.00 to change out both tracks did it in 8 hours , ok so I am a little slow, but did some painting and greasing and checking parts...
  9. S

    remove hydrulic oil from tank in t-190

    what kind of pump is best and most effective to remove hydraulic fluid from tank to change fluid. this maintenance situation coming up soon for my machine, what signs should you look for in removed fluid that might indicate future problems in system ?
  10. S

    bobcat T 190 Auxilary problem

    Need some help again----------:bash Haven't used the auxilary hyd. in a while got a new grabble bucket and was gonna try it out. Well it closes but want open the jaws. So I have run my auger in the past so I know it works forward and reverse. well it would engage clockwise but not in reverse...
  11. S

    propleyne glycol

    in a bind low on antifreeze ,and am 120 miles from dealer anything that will work in place of the special antifreeze design for bobcat. thanks
  12. S

    cleaning out belly pan area bobcat t 190

    The belly pan area on this unit has collected about 1/1/2 in dirt mixed with hyd fluid and I want to washout and and remove . How do I go about this? and what electronics should avoid getting wet? and what precautions should I take. and where will this debri come out . Will it be in the engine...
  13. S

    T-190 track erratic movement

    I have adjusted the track to 5/8 in. slack on middle roller with track off ground. so tension and all is well there. When I am moving upgrade track on right side jerks erratic and backing up somewhat. Moving on level ground or down hill does not do it. No sound is being heard just feel it...
  14. S

    Bobcat T 190 (2007) temp. press bar meters ( gauges)

    Anyone have any insight on Increment of measure-of bars on gauges , for example Hydrualic pressure bars = how much psi - temperature 3 bars = what temp (fahrenheit or centigrade). or do you just look at meter and say thats running close to center and that is ok or should you be aware of what...
  15. S

    Bobcat 2007 T-190 hydrulic fluid level

    Have a question, recently got this steer - in checking hydraulic fluid in site glass there appears to be a small white ball visible in site glass. and it is all the way to the top. Is this right ? Is it suppose to be at center of site glass ? Is this a problem? The person I got it from...
  16. S

    Best operating RPM for bobcat T-190 skidsteer

    What is the best avg operating RPM for the bobcat t-190 skidsteer. To achieve best motor performance and protecting Hydraulic components. My idle speed is at 1230 rpm .What RPM should I move it too , to operate. normal operating such as leveling , lifting , digging should it variate with job to...
  17. S

    Bobcat T-190 sprockets

    Just purchased 2007 Bobcat T-190 skidsteer acd control Keyless pretty standard machine. After having it shipped to me. I am in the process of inspecting and the right track when moving over rough terrain ,or I am in a right turn travel. The sprocket tends to skip or jump over center bars on...
  18. S

    Slowstep

    I'm a New Comer to the forum. Texas born with a little time in Oklahoma and Colo. Been tinkering with skidsteers and Backhoes and misc . equipment. Sold my new Holland steer ,and picked up a Bobcat T-190. Need a little knowledge on the Bobcat its a different breed. I am 69 and steel trying to...
Top