• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

Recent content by Sameh

  1. Sameh

    Cutout test aborted

    Dears, Sometimes the cutout test aborted and give me a feedback that it is because a significant load on engine such as cooling fan or A/C. How can I control them during the ET? Anybody has a solution, please.
  2. Sameh

    "14" grader NN4 has an excess engine oil consumption

    Thanks all, I removed the fuel injectors and checked by borescope and found liners one and four have scratches.
  3. Sameh

    "14" grader NN4 has an excess engine oil consumption

    I can't remember friend. But be comfortable, I checked it and it was normal with the oil consumption.
  4. Sameh

    "14" grader NN4 has an excess engine oil consumption

    Hello all, I have a problem with a new grader which consumes engine oil excessively. The oil level decreases continuously and I have to adjust it continuously. It costs me 12 litres during the 250 hours work to keep the level adjusted. No leaks, the blowby within range and the exhaust color is...
  5. Sameh

    966L unable to find an exact match for the transmission software

    Thanks Nige. I got it the problem was on my ET software not the flash file. My ET needs to be updated.
  6. Sameh

    966L unable to find an exact match for the transmission software

    Hello, does anybody met any message like that attached message? Be informed that it appeared after updating the transmission flash file. All ecms are updated to the last flash file except the information display. It doesn't accept the flash file and show the second attached image. Anybody has a...
  7. Sameh

    14 excessive engine oil consumption

    2461hrs
  8. Sameh

    14 excessive engine oil consumption

    Dear Nige, The 13.5 litres are the sum of all times oil added during the 250hrs. The grader is 2461hrs. The idle time is 16% and the average engine load factor is 30%.
  9. Sameh

    14 excessive engine oil consumption

    Dears, I have a motor grader of model "14" with a prefix NN4. The problem is an excessive oil consumption. I have added 13.5 litters after 250 hrs to top up engine oil level. No external leaks found, no leak from turbo seal and the blowby is as recommended. What's your opinion?
  10. Sameh

    14M can't steer fully to the left

    Yes, Nige. I checked the power and the signal at harness, it was reached as specs. I swapped the harnesses betn left and right cylinders, the code transfered to the other cylinder.
  11. Sameh

    14M can't steer fully to the left

    Hello Nige, I got the solution. I checked the LH position sensor of steering, it was failed.
  12. Sameh

    14M can't steer fully to the left

    14M grader has a problem as when I steer to the right it responds and steer to the full right but when I steer left, it can't steer fully. Has somebody faced a likely problem? See the attached video, please.
  13. Sameh

    D9 GC blade lift abd ripper lift suspended

    Un update, when you lower the blade then raise It doesn't respond until you move the joystick several times in all directions.
  14. Sameh

    D9 GC blade lift abd ripper lift suspended

    Dears, I have a problem when I apply lift for blade or ripper It sometimes works and sometimes no responce. When I use ripper working for a while then apply blade lift I have no responce. The pump pressure and margin pressure is ok.
  15. Sameh

    High temp of the front axle oil

    Great. Do you have I0 number for the media regarding breather installation?
See more
Top