That makes it even worse!It's a Big Tex trailer.
Looks like normal 17-18" wheels. The tires don't look right for 19.5's which usually have a pretty square profile and unique look.Looks like it may have Rickson 19.5 wheels
That makes it even worse!It's a Big Tex trailer.
Looks like normal 17-18" wheels. The tires don't look right for 19.5's which usually have a pretty square profile and unique look.Looks like it may have Rickson 19.5 wheels
Here is better view of it. At least the front tires on the truck are still on the ground.
It appears to have a welder in the truck bed to !
View attachment 235016
I'm perversely pleased when an informed cop pulls this rig over.
It’s only a 390.........LOL that poor trailer!
Yes but if you load from opposite sides for each successive trip then the trailer chassis should twist back straight again on every 2nd load.....I bet that 390 gets easier to load each time as the trailer frame bends more. Baffles me they wouldn't at least block to the frame to prevent it from twisting so bad.
That was the 1st thing I noticed. Operator was very gentle. Maybe HE owned the trailer?Watching the way they walked it on and off over the side it obviously wasn’t their first rodeo.
From this and all their other videos I get the impression that the older guy with the beer gut who’s giving the directions is the boss.That was the 1st thing I noticed. Operator was very gentle. Maybe HE owned the trailer?
Did you miss that this move was done from one location on a mine site to another. Did you notice how many conveyors they had to go under.?I was more curious about the boom left up in the air that would be real close to an over height and its definitely going to raise the center of gravity a lot