Joeyz
Active Member
- Joined
- Sep 21, 2015
- Messages
- 32
- Location
- Centereach ny or deposit ny
- Occupation
- Welder and diesel mechanic
so I have Been reading on here for about 2 yrs give or take. I work full time as a mechanic in a heavy equipment shop. We also do alot of motors in truck to. I also worked as a welder and iron worker before i got to thinking long term employment I was (23) now 25 . I have turned wrenches throw out high school and tech school and wanted more then when i was layed off. I was offered a job and it took off for me. I still weld on the side to bring in extra money and i am slowly doing more mechanical side work. Would like to go full time one day. So i figured try out my own thread if it takes off why not.
truck had no manual locks customer supplied one did install. the skid steer buck is shot made cutting edge out of 1/2 450 hard ox to go do brush/snow clearing. Its on a 1980s case customer has since bought a universal mount and installing it so no more old buckets.
my current dd/ work truck
truck had no manual locks customer supplied one did install. the skid steer buck is shot made cutting edge out of 1/2 450 hard ox to go do brush/snow clearing. Its on a 1980s case customer has since bought a universal mount and installing it so no more old buckets.
my current dd/ work truck