02Vetteracer
Member
Hope someone has an idea with this one. We have had this Bobcat T300 since new. There has been a random issue with the keyless entry/security on the machine starting during the second year we had it. During the normal starting procedures i.e. sit in machine, lower lap bar, press yellow enter button, enter code, press start, press unlock.. off we go. Well intermittent until recently the keyless screen wouldn't "Power-up". Meaning, there is nothing on the screen after pressing the yellow enter button. Sometimes you can enter two digits but will not allow a third. I don't know if the two things are related but that is the randomness of the problem. When there is nothing on the screen you can press the light button on the left panel and the screen will power up but most of the time nothing further happens. We have had the Bobcat tech's out at least a dozen times and still no positive results. There are several jumper wires the tech's said will fix the problem but still no noticeable improvement. The most recent tech showed me one of the gang plugs under the seat to unplug/replug blow out etc..
Any ideas??
Any ideas??