Worked in a light drizzle today..... some winter??
Had to make a "right turn" on that electric service....
Did not realize that by feeding the meter from underground, I was limiting the location my load side runs to the adjacent panels/disconnects.
The utility will not allow any cables to be crossed ( line/load)..... so my initial install had to be taken apart..
View attachment 251020
My load runs would have 180'd around the bottom of the meter base and then split left and right to top feed the panels.
My underground conduit runs from this 'rack' are set so the orientation of the panels could not be changed....
So this is what I came up with.. Bottom right corner of the meter box is the only place I can run from.
View attachment 251021 front ( business side)
View attachment 251022 back..
the conduit bodies dang near bankrupted me
Shame to have to
not use all that space on the topside of the meter box.
Have to drop in the 4" run underground to the future pad transformer..... which is a short run( 2 sections) thank goodness ... and run the cable between the boxes.( 4/0 Al)