Volvo 160 smoking

[funwithfuel]

With a little time and effort, we'll help you through this. Take a deep breath. First thing i would do is inspect the injectors. It's a simple task. Any questions, fire away.

 

[Vetech63]

So are we fixing this thing?

 

[sfrs4]

from the engine manual for the D6D
87. Install the injectors with the marking/machined surface toward the valve springs.

 

[Havoc]

Well I got a little time in between calls to mess with this think it smokes sum at ideal but come off ideal and it white and black smoke and a lot of and it don’t stop pouring smoke so I’m going to try to kill one injector at a time to see which one maybe hung is my guess any idea or thought would be good

 

[Havoc]

from the engine manual for the D6D
87. Install the injectors with the marking/machined surface toward the valve springs.

I’m have the valve cover pulled shortly

 

[Havoc]

All flat spot are towards the valve springs

 

[Havoc]

All injector look new and one injector driver

 

[funwithfuel]

Can you attach a pic of your injector as it's installed?

 

[Havoc]

Yes sir

 

[funwithfuel]

I would suggest removing all 6 and having them pop tested. You want to know that the nozzle is atomizing the fuel correctly and at the correct pressure.

 

[Havoc]

That the smoke just off ideal and I don’t have any smoke from under the valve cover

 

[Havoc]

Is there a way to shut the fuel off to each injector with out scanner?

 

[funwithfuel]

Yeah, crack a line nut loose, that effectively kills that cylinder. Place a rag over when you do.

 

[funwithfuel]

What did you decide?

 

[Havoc]

I’ll be back on it Tuesday and I will update then

 

[Csocha]

Did you get anywhere on this thing? I have the exact machine with the same issue looking for input

thanks!

 

[funwithfuel]

Please start a new thread, include your full model and serial so we can help you. With multiple levels of emissions regulation and several changes within a generation, it's hard to say yeah, look for this or that.

 

[Gary Layton]

And play nice...let us know in your thread what finally happens. I hate to read a thread like this and the OP is getting great input and advice that some of us are learning from...and then they just disappear. If folks here share their time and knowledge so thoroughly and then the OP does not follow through with what eventually fixed (or did not fix) the unit...it shows great disrespect by the OP. If he had some terrible life event, I understand. But I am sure some guys just get what they want and then move on, kind of like visiting a brothel. Don't be a whoremonger.

 

[Diesel Dave]

But I am sure some guys just get what they want and then move on, kind of like visiting a brothel. Don't be a whoremonger.

A New Years Resolution !!