I traced the wires again today, pulled the cam sensor out and viewed the tone wheel. I cannot see anything abnormal there. While testing the wires to the cam sensor again, from the large square connector for where the engine harness connects to the ECM harness, I tested for ground and cannot find where the sensor can get it's ground from.
The ground wire is all good going into the large square harness connector, but lines up with a blank white plug on the ECU side of that square connector. There is a grounded pin right beside the ungrounded wire. Am I making sense or am I confusing everyone. I don't believe I have a ground for the Cam sensor unless there is a common ground I'm not finding. I have no continuity to ground and no ground that lines up with that ground wire.