• Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!

td7g dresser

g_man

Senior Member
Joined
Apr 21, 2011
Messages
321
Location
Northeastern VT
Occupation
Retired
Clutch is different. You have to go in from the top - under the seat platform. And you do the clutch and brake together. Here is a couple photos of pages from my shop book on how to do it. Have fun and good luck. Hope this helps.

gg
Steering1.JPG
Steering2.JPG

Steering3.JPG
 

B mac

Member
Joined
Mar 14, 2023
Messages
6
Location
Sydney
looking to see if there is any good used range selector out there for sale 1990 td7g Dresser. I have all 3 gears in forward and only 2 gear in reverse rebuild the torque converter, put new ring seal on the input shaft and output shaft in the transmission. check the pilot control valve it all looked good. but the range selector has scores on the spool valve any help would be greatly appreciated thanks!!
 
Top