funwithfuel
Senior Member
Someone had mentioned just running current through it. I thought that was a terrific idea
If it is really really a dire situation get an air hammer buy a spare chisel for it and grind it down to fit one side of the hex bolt or nut and hit it a couple of times with the air hammer that may break it loose too.
It could be reused, but I am going to replace it, cause when I used the 7 foot cheater, the socket slipped off once and dinged then head.And you can reuse the bolt as well.
OK... so, for that stupid tight last bolt, I ordered the bolt buster and it could heat the bolt, so I heated and sprayed with pb blaster, still no go. I also ordered a torque multiplier, but it took over a week to get it. Once it arrived, I found that I needed a different socket length to use the multiplier then what I had, so got that. Bolt came right out with the multiplier, no pops or bangs... so, final answer was ‘torque multiplier’. Thanks for all the suggestions.