kevink
Well-Known Member
Has anyone on here had much experience with powerscreen powergrid 800s. We purchased one but it dosent seem to shake as much as I think it should is there anything to check. Thanks in advance
Yep good advise. I do the samething just minus the paper. Not to sure that machine can run backwards. Hydralic motors are tougher to plum backwards than electric motors but good idea to check.Kevink,,,, before you go changing the weights if its possible, tape a piece of paper to the side of your screen box, then with the screen running, stick a pencil to the paper, hold the pencil as stationary as you can. This will give you the pattern that the screen is actually running. It will also show you which direction the screen is throwing your material ( I've screens running the wrong direction). Save this as a baseline if you do any adjusting , you can compare the baseline paper to any change's you made. IE. rpms,, stroke,, height and more. Hope this make's sense to you..... Grandpa
I have a Fab Teck hydraulic plant.... the screen box rotation can simply be reverse by putting the control lever the other wayYep good advise. I do the samething just minus the paper. Not to sure that machine can run backwards. Hydralic motors are tougher to plum backwards than electric motors but good idea to check.
Dusty
I have a Fab Teck hydrauliaqc plant.... the screen box rotation can simply be reverse by putting the control lever the other way
Grandpa
Good advice on the paper. I learn something new all the time here.
Tried the sheet of paper grandpa the light did come on, gonna check with the manufacter and see on the pressures looks to be working correct thanks for all the help.
That's why they invented Grandpas.