I know that you've all been waiting in "breathless anticipation"....so, your wait is over!!
Here is the consolidated list of pin-on bucket mounting dimensions (with diagram) in PDF format...
View attachment EXCAVATOR Pin-on Bucket Mounting Dimensions & Diagram .pdf
...& here are the source Excel spreadsheets in compressed ZIP format (each upload is limited to 100kb, so I had to split it into 3 parts),,,
View attachment EXCAVATOR Pin-on Bucket Mounting Dimensions A-J.zip
View attachment EXCAVATOR Pin-on Bucket Mounting Dimensions J-Z.zip
View attachment EXCAVATOR Pin-on Bucket Mounting Diagram.zip
Thank you to Roo Attachments from Australia for your input. The model & revision date of your info is shown in RED text. I did not use any of your "same as" data, as each reader can draw his own conclusions based on the raw data listed.
Thank you to BokkieAndijk for the link to pin-on data on a website at P. Flannery in the UK. The model & revision date of Flannery data is shown in BLUE text. This data took a while to incorporate, as first I had to create a list from the way it was presented on Flannery's website. I should note that their website includes a diagram for each model, which usually includes some other info, such as boss dimensions & pin retention details.
You will note in the attachments above that the source dimensions are shown in bold, & that most are in mm. Far fewer source dimensions are in inches. In both cases I've also shown the inch or mm conversion in non-bold text.
I welcome any corrections, additions, or comments, as I continue to try to maintain this "master" list of dimensions.