Hello Chief Jim, Thats a nice lookin Cat, the brush hog is a good thing to have on the back side. If you can Ck the lever that is under the hump where the brake goes into the case, it could have a big oblong hole in it, it cost about 90 bucks, but a good welder can fix. I did remove my clutch on the left side, took it to the Cat guy
and they looked it over, and it was ok, so i reinstalled it and a new brake band, on the other side a lot of cleaning and installing new To4. There is a diference in the
wet and dry clutctes, I wondered why i did not have a brake adjustment bolt underneith, but i did see thoes drain plugs, and i was sure that the clutches were dry.
I had some crow for breakfast, More talk soon, sam.