Komatsu d58p motor

[John McDaniel]

I have a good tractor near me that is really straight has excellent undercarriage looks to be a real good machine


Here’s the bad shot a rod out the side of the block


Where would be a good place to get a motor for one of these or is there other komatsus that use this same motor it is a komatsu motor forsure

 

[John C.]

You are likely to need to provide more information than that. Full model number, serial number and such is a start. Will need to know if gray market or not.

 

[John McDaniel]

You are likely to need to provide more information than that. Full model number, serial number and such is a start. Will need to know if gray market or not.

Will have to get it tomorrow if the guy is around I will get it just trying to see if it would be worth buying and making while again or leave it where it’s at

 

[coalrulz]

From what I am able to find D58P-1 was equipped with a 6D125E-2 engine. Is your engine equipped with a turbo?
Other Komatsu models that used the engine include:

• D53A/P-17 130hp 452lbf-ft torque 6D125-2 Non Turbo
• D58E/P-1 130hp 468lbf-ft torque 6D125-2 Non Turbo
• D65E-12 175hp 589lb-ft torque 6D125-2 Non Turbo
• D65EX/PX-12 188hp 723lb-ft torque S6D125-2 Turbo
• D75S-5 203hp 679lb-ft torque S6D125-2 Turbo
• D85A-21 225hp 752lb-ft torque S6D125-2 Turbo
• D87E/P-2 233hp 736 lb-ft torque S6D125-2 Turbo
• PC400-6 306hp 892 lb-ft torque SAA6D125-2 Turbo and Air to air aftercooled

If you are going the route of finding an engine out of another machine the D53 looks to be a close match.

 

[John McDaniel]

From what I am able to find D58P-1 was equipped with a 6D125E-2 engine. Is your engine equipped with a turbo?
Other Komatsu models that used the engine include:

• D53A/P-17 130hp 452lbf-ft torque 6D125-2 Non Turbo
• D58E/P-1 130hp 468lbf-ft torque 6D125-2 Non Turbo
• D65E-12 175hp 589lb-ft torque 6D125-2 Non Turbo
• D65EX/PX-12 188hp 723lb-ft torque S6D125-2 Turbo
• D75S-5 203hp 679lb-ft torque S6D125-2 Turbo
• D85A-21 225hp 752lb-ft torque S6D125-2 Turbo
• D87E/P-2 233hp 736 lb-ft torque S6D125-2 Turbo
• PC400-6 306hp 892 lb-ft torque SAA6D125-2 Turbo and Air to air aftercooled

If you are going the route of finding an engine out of another machine the D53 looks to be a close match.

Thank you and just by memory I’m sure I saw a turbo I think I can buy the tractor for 4000 bucks only reason I’m looking into I mean who doesn’t need a big chunk of iron like that

 

[John McDaniel]

From what I am able to find D58P-1 was equipped with a 6D125E-2 engine. Is your engine equipped with a turbo?
Other Komatsu models that used the engine include:

• D53A/P-17 130hp 452lbf-ft torque 6D125-2 Non Turbo
• D58E/P-1 130hp 468lbf-ft torque 6D125-2 Non Turbo
• D65E-12 175hp 589lb-ft torque 6D125-2 Non Turbo
• D65EX/PX-12 188hp 723lb-ft torque S6D125-2 Turbo
• D75S-5 203hp 679lb-ft torque S6D125-2 Turbo
• D85A-21 225hp 752lb-ft torque S6D125-2 Turbo
• D87E/P-2 233hp 736 lb-ft torque S6D125-2 Turbo
• PC400-6 306hp 892 lb-ft torque SAA6D125-2 Turbo and Air to air aftercooled

If you are going the route of finding an engine out of another machine the D53 looks to be a close match.

also it must be a later model machine it has the twist handle for selecting gears like the later d43s and all had