John C.
Senior Member
The machine pops out of reverse but all the pressures are good. It doesn't matter which range it is in. Machine has a joystick control for direction, range and steer right or left. When in reverse it seems to me that the control has no detent left and easily pops out of gear. I checked the parts book which only shows a detent for the range selection. Basically turning the handle changes the ranges. There is nothing shown on the spools for direction. Looking at the diagram, it looks like only the opposing springs at the bottom of the spool hold the lever in place. I can't figure that out to be true without taking the whole thing apart. There is no hydraulic diagram showing the control in the service manual.
I'm looking for anyone who has some experience with this control before I start shutting the machine down and finding out that parts are in another country and weeks away. What holds the lever in the reverse position?
Thanks for any information.
I'm looking for anyone who has some experience with this control before I start shutting the machine down and finding out that parts are in another country and weeks away. What holds the lever in the reverse position?
Thanks for any information.