Got a kobelco sk340lc-9e I think I may be having some issues with the mechatro controller no fault codes on the cluster. No active fault codes in ecm
But I have no throttle and no hydraulics
I can throttle the engine to about 1000 rpm with my scan tool but not any higher. Safety switch/ lever is working. Checked all fuses and relays three times. I toggled to a screen on the gauge cluster and it does see the throttle increase but not the ecm. Any help is appreciated
But I have no throttle and no hydraulics
I can throttle the engine to about 1000 rpm with my scan tool but not any higher. Safety switch/ lever is working. Checked all fuses and relays three times. I toggled to a screen on the gauge cluster and it does see the throttle increase but not the ecm. Any help is appreciated