we have a JD 210C that we have an issue,, it defaults to N after about 5-10 mins of use ,, pressures are good and clucth botton is working fine with no disruption during operation, But here is the wierd part <<< if I shut of the ing key and restart asap it goes right back to work for about 5-10 mins and defaults to N again
any suggestions guys
all systems pressure are to spec and i have ran a muilt meter in the system to see if the cultch button is causing the issue
also pressure are fine when this happens
any suggestions guys
all systems pressure are to spec and i have ran a muilt meter in the system to see if the cultch button is causing the issue
also pressure are fine when this happens