MattB
Active Member
I'm trying to understand how to read the specifications for implement hydraulic flow.
The specs say 2 x 20.9 gpm + 16.3 gpm for the 8 ton excavator.
Presumably not all of the rated flow will run to the work tool.
I'm looking at a hydraulic chainsaw that needs 30-60gpm to run well.
The specs say 2 x 20.9 gpm + 16.3 gpm for the 8 ton excavator.
Presumably not all of the rated flow will run to the work tool.
I'm looking at a hydraulic chainsaw that needs 30-60gpm to run well.