Nige
Senior Member
It should have 5 medium (0.9mm) shims in it as a starting point.
-
Thank you for visiting HeavyEquipmentForums.com! Our objective is to provide industry professionals a place to gather to exchange questions, answers and ideas. We welcome you to register using the "Register" icon at the top of the page. We'd appreciate any help you can offer in spreading the word of our new site. The more members that join, the bigger resource for all to enjoy. Thank you!
D6H transmission overheating
- Thread starter Pralhad Birdi
- Start date
-
- Tags
- bulldozer d6h dozer transmission
Pralhad Birdi
Well-Known Member
Interesting! This only had 3 medium shims in.
Additionally, the outer spring free length is 74.5mm against a spec of 75.7mm. The inner one was pretty much up to spec.
Nige
Senior Member
Remember that what the parts Manual quotes is only a starting point. Or maybe shims were robbed from there to put in somewhere else because the Part Numbers are the same for all three locations. Who knows.?
If one spring is so far off spec I would suggest to try to get a pair of new springs if they are available.
Pralhad Birdi
Well-Known Member
Yes most likely, considering the fact that there’s so many extra ones everywhere else.
I’ve enquired about replacements, so hopefully should be able to get them